Mk2 Tiguan VCDS Tweaks

[Wazza 162]

I got that same error when I first did it - turns out I'd been counting the bytes from 1, instead of from 0.

i.e. byte 0 starting at the top, not byte 1.

Any chance you made the same mistake I did?

Maybe only going on hillbillys instructions so I would have thought he would say the byte by number e.g. byte 0 or byte 1 etc

[PDMJO]

I'm so close, now have it in my settings and activates on auto lights, stalk pushed forward but comes up Fault light assist in dash centre

I got that same error when I first did it - turns out I'd been counting the bytes from 1, instead of from 0.

i.e. byte 0 starting at the top, not byte 1.

Any chance you made the same mistake I did?

[Wazza 162]

Why that one Worked it out as when i click on it it gives the option of HBA

I know If have DLA enabled and so it will bring that up when I tick the box I did

I'm so close, now have it in my settings and activates on auto lights, stalk pushed forward but comes up Fault light assist in dash centre

[Guest001]

Mine is the same except High beam assist instead of Dynamic light assist with three boxes, I tick the first box

Why that one Worked it out as when i click on it it gives the option of HBA

I know If have DLA enabled and so it will bring that up when I tick the box I did

[Wazza 162]

Get your definitons correct or you will end up well in the s**t if you mix them up

Its BYTE 21 BIT 5 and in mine it goes down to BIT 4 and then it says Light Assist (AFS) Dynamic light assist so tick the second box in that

Mine is the same except High beam assist instead of Dynamic light assist with three boxes, I tick the first box

[Guest001]

Learning a bit more with each step but still not showing in the light settings.
Byte 5 isn't shown but I presume it's the light assist box, there are 2 more unlisted boxes under that one do I leave them alone?
Close to giving up but I must be close to activating HBA.
THANKS for your patience.

Get your definitons correct or you will end up well in the s**t if you mix them up

Its BYTE 21 BIT 5 and in mine it goes down to BIT 4 and then it says Light Assist (AFS) Dynamic light assist so tick the second box in that

[Wazza 162]

To the right of long Coding at the top is a little box with O and 1 on it press the right side of it and magically what you want will appear

Learning a bit more with each step but still not showing in the light settings.
Byte 5 isn't shown but I presume it's the light assist box, there are 2 more unlisted boxes under that one do I leave them alone?
Close to giving up but I must be close to activating HBA.
THANKS for your patience.

[Guest001]

There was no Byte options like the control unit 09

To the right of long Coding at the top is a little box with O and 1 on it press the right side of it and magically what you want will appear

[Wazza 162]

USe the 'Go advanced button and follow prompts

When u entered A5 did you scroll along to byte 21

There was no Byte options like the control unit 09

[Guest001]

Followed directions and was going well until the last step.
Selected A5 entered the long coding but no Byte options came up, help please I'm only new at this so be patient.
How do I attach photos to a thread?
Cheers

USe the 'Go advanced button and follow prompts

When u entered A5 did you scroll along to byte 21

[Wazza 162]

Hardly their fault you didnt follow what has been posted about it and the app DOES work because I did it on mine no trouble. Also you can just revert it back and not need 3 lots of credits or could even have coded it back for free

Does you vehicle meet the criteria HIGHLINE ??????? Lots more tweaks available and not a credit used In fact I have 621 saved up and not needed

If you used coding it wouldnt have cost you anything and the coding for that is on the Autoinstruct site as per here and it DOES WORK

Enable Auto High Beam (Light Assist)
Enables the Auto High Beam for Highline Models Only.

Workman, Tools blame???????

Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
1. Fernlicht_assistent – Menuesteuerung Fernlichtassistent – Change to ‘Present’
2. Fernlicht_assistent – Erweiterte_Frenlichtsteuerung – Change to ‘AFS, FLA, Fernlicht ueber AFS’

Enter Coding
Byte 2 – Tick Bit 0 and Bit 1

Select Control Unit Front Sensor Driver Assist System (A5)
Enter Coding
Byte 21 – Tick Bit 5

Reboot Headunit. Option will now appear under ‘Light Settings’ and pushing the high beam stalk forward will reveal the symbol with an ‘A’ within it.

Followed directions and was going well until the last step.
Selected A5 entered the long coding but no Byte options came up, help please I'm only new at this so be patient.
How do I attach photos to a thread?
Cheers

[paoloengines]

Closing windows & sun roof with 1 click on key remote

Hi... someone have this coding for MK2 Tiguan..!?
Thanks.

YouTube

[Guest001]

Danintas, everything can be done and undone by long coding. The credits/apps(or whatever they’re called) are shortcuts for POTENTIAL features of VW vehicles. Nothing is guaranteed to automatically work on Australia market tiguans/golfs/etc.

Coding (still easy) is the best way to play.

Feel free to sell yours/bin it, but learn from the experience- don’t blame the tool.

Hes blaming the wrong tool ROFL

[Guest001]

My advice is NOT to buy OBD11, and if you already have, chuck it in the bin. It has cost me a heap of credits to activate High Beam Assist, then deactivate, and then revert to original. Support is woeful.

Hardly their fault you didnt follow what has been posted about it and the app DOES work because I did it on mine no trouble. Also you can just revert it back and not need 3 lots of credits or could even have coded it back for free

Does you vehicle meet the criteria HIGHLINE ??????? Lots more tweaks available and not a credit used In fact I have 621 saved up and not needed

If you used coding it wouldnt have cost you anything and the coding for that is on the Autoinstruct site as per here and it DOES WORK

Enable Auto High Beam (Light Assist)
Enables the Auto High Beam for Highline Models Only.

Workman, Tools blame???????

Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
1. Fernlicht_assistent – Menuesteuerung Fernlichtassistent – Change to ‘Present’
2. Fernlicht_assistent – Erweiterte_Frenlichtsteuerung – Change to ‘AFS, FLA, Fernlicht ueber AFS’

Enter Coding
Byte 2 – Tick Bit 0 and Bit 1

Select Control Unit Front Sensor Driver Assist System (A5)
Enter Coding
Byte 21 – Tick Bit 5

Reboot Headunit. Option will now appear under ‘Light Settings’ and pushing the high beam stalk forward will reveal the symbol with an ‘A’ within it.

[Simonr23]

Danintas, everything can be done and undone by long coding. The credits/apps(or whatever they’re called) are shortcuts for POTENTIAL features of VW vehicles. Nothing is guaranteed to automatically work on Australia market tiguans/golfs/etc.

Coding (still easy) is the best way to play.

Feel free to sell yours/bin it, but learn from the experience- don’t blame the tool.