If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
The first time i used the piece of **** it slipped on the concrete while the car was off the ground, and the car bent it. Very lucky it didnt damage the car, i got another jack through warranty.
Stop Scratching Your Rear End and the rest of your chassis with our specially formulated soft plastic jack pads. PROTECH pads provide complete protection from the hard metal surface of your jack, preventing scratches, chips and dents forever when used properly. Stop using those blocks of wood, rags, and towels that can slip or tear through resulting in damage to your chassis. PROTECH'S jack pads come in a variety of sizes and styles to fit almost any jack on the market today, from our simple over the jack head style to the side lift jack pads for lifting late model cars at the pinch weld. The jack pads are made of an extremely durable, patented material that's impervious to oil, grease and gas and will last a lifetime. As some of you may have noticed our protective pads have changed from yellow to black. We made this move to save on production costs and reduce lead times. The quality is still the same! The side lift jack pad makes lifting your late model cars easy. Simply place on your floor jack and lift at the pinch weld. No more hassle with the factory scissor jack. <em>Priced individually.</em>
From Adelaide the number was given as 0011/0018+1+213/323 then the ph no. 866 397 5487.
No luck with that sequence. Right no. code was 0011+1+ their phone no.
Last edited by WEDEL.1; 01-11-2008, 02:33 PM.
Reason: More info
Comment