What have you done to your mk4 (golf/bora) today?

[McDub]

huh? since when were you selling it?

[trickysimon]

Any idea on what your gunna buy Lonewolf?

[JustCruisn]

I resolved my ABS issue today.
I found the front left speed sensor was loose. The bolt was almost all the way out.

[Rybky]

Booked my car in to have Bilstein Heavy Duty shocks and the ECS Stage 2 refresh kit installed, will be done next Wed, can't wait!

Adam

[Dyldo]

where is it booked in at?

I will be having a red hot crack at installing the stage 2 refresh and a set of Weitecs by myself. I've got all the install tools coming from ECS too.

[Rybky]

where is it booked in at?

I will be having a red hot crack at installing the stage 2 refresh and a set of Weitecs by myself. I've got all the install tools coming from ECS too.

Just a local mechanic and tyre place near where I live, they are giving me more confidence about their quality of work than the so called VW specialist up this way!

I don't think I would tackle this myself, it is going to take professionals a good day to do all this plus you need to get a wheel alignment after fitting the refresh kit. It would end up taking me a week and I would not trust the results!!

Adam

[Lonewolf1983]

Any idea on what your gunna buy Lonewolf?

Already have the new car

[trickysimon]

Yuck, Japanese
Just joking, looks great!
Any mods so far?

[Lonewolf1983]

Mods/work done:
45V1 R33 Turbo running 14.5psi
Nistune Ecu - tuned to 236.5rwhp
Bosch 040 Fuel Pump
3" Bellmouth Dump Pipe
3" Mandrel Bend Exhaust System
All new Power steering hoses
All new Cooling hoses and bypass hoses
All new Vac & Breather Hoses
All new fuel hoses from tank to the front of the car
New Rocker Cover Gaskets, D Rubbers & Bolt Washer Rubbers
New Injector Seals upper and lower
Intake Manifold stripped off, acid bathed and re-sealed
Hicas Lock Bar
Gearbox overhauled with new bearings and seals
New K sport Coilovers
New Front Nolathane Camber Adjustment Bushes
New Front Nolathane Caster Adjustment Bushes
New Front Nolathane Lower Control Arm Bushes
17" Buddy club P1s wrapped with 235 GT Radials on the rear and 225's on front
Oldschool Momo Wheel
Greddy/Grex Diamond Gearknob
GTR front Bumper Rio
VZ Commodore Side Guard Flashers
Stripped back the GT Badges to Chrome Finish
Sound deadner and all sound insulation removed, boot also stripped
324mm GTR front rotors with unique autosport caliper brackets
Brand New DBA 4000 Wiper Slot front and rear Rotors
Brand New EBC redstuff pads front and rear
BeeR rev limiter
Fire Extinguisher fitted to passenger floor
18% Tint

Its very clean inside too:


Plans:
GTR seats for a bit more headroom and better support
Raise suspension for better ground clearance
Varex exhaust
new alarm/central locking
2nd set of rims with r-comps
Get to the track and enjoy it

[dainese]

Already have the new car

that's gorgeous mate.
forced induction FTW.

its in bloody good nick, in'it?

[drewr]

Somebody GIVE me some wheels! Hahah, i'm so bloody sick of the aristos it's not funny!

[JustCruisn]

Please keep the thread on topic.

No more pics of Japanese rice cakes please.
Start a new thread if you want to discuss the Nissan.

[dylan8]

is anyone in oz running 9" in front and not sitting mexican? hoping to shoehorn 9's in front and 10 or 10.5 in the rear. would be good to get some reference.

by mexican u mean poke im guessing...? should be able to JUST do it on the right suspension and offset and camber. so in aus, i doubt it, just be normal and go 8s or 8.5. unless ur planning on poking or adding flares i dont think you'll get 10.5 out back as well. 10s maybe with a little poke

Somebody GIVE me some wheels! Hahah, i'm so bloody sick of the aristos it's not funny!

are you looking to offload them if you do find some new ones...?

[drewr]

Nah, for what i'll get for them i don't really think it's worth it.

[funkymonkey]

offtopic post, PM'd OP.