14x8 4x100 14" RCA

[lawny]

these could possibly look awesome on a mk1

http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=270540098296&ssPageName=STRK:MEWAX:IT#ht_500wt_1182

sorry just changed the link

[Lorenz]

That link is to a pic on your photobucket??

[rayray086]

Quick search on eBay - http://cgi.ebay.com.au/HOLDEN-GEMINI...item3efd724af8

They look awesome! With centre-caps too!

[dom123]

what offset???

[Lorenz]

They are PHAT as! Look brill on a MK1

[jayjay]

they do look pretty sweet, but i hope they actually are 14x8... not many cars can tuck that if they're that wide.

[dom123]

'the off set from the back of the mounting face to the outer edge of the in side of the rim is 133mm 5 1/4" ' how would this suit a mk1 guys?

[Jarred]

I dont even have a mk 1 anymore () and I still want them! cool as.

couple things. you'll need different wheel bolts (or studs) centrebore spacers and you *may* have trouble clearing the front brakes on a mk 1.

then tyre size, if they're actually 8" wide, i dont know what the hell tyre you'd run! (to try and keep it low profile still)

From the info he's given, I figured it out to be about ET19. which is pretty good for an 8" on a mk 1! hopefully his measurements were accurate!

[WABIT]

'the off set from the back of the mounting face to the outer edge of the in side of the rim is 133mm 5 1/4" ' how would this suit a mk1 guys?

thats backspacing, take a wheel off your mk1, put a straight edge on the brakes where the wheel would normally sit, then count 133mm or 5 1/4"towards your suspension

ohh and i also seriously doubt they are 8" wide.... the barrels arnet wide enough

most people measure the size from far end to end, when infact its correctly measured from inner tyre bead's

THIS!! is a 14x8


dom

[dom123]

I dont even have a mk 1 anymore () and I still want them! cool as.

couple things. you'll need different wheel bolts (or studs) centrebore spacers and you *may* have trouble clearing the front brakes on a mk 1.

then tyre size, if they're actually 8" wide, i dont know what the hell tyre you'd run! (to try and keep it low profile still)

From the info he's given, I figured it out to be about ET19. which is pretty good for an 8" on a mk 1! hopefully his measurements were accurate!

so they would sit pretty well within the guards???why would you need centrebore spacers and different studs, im noob with wheels

[Jarred]

Yea I reckon they're probably a 7" wheel too. don't look nearly wide enough for 8's!

would make the et32. which means you could fit spacers ont he front to clear brakes (if need be) and not poke a truck load!

More desirable as 7's imo

gemini wheels have studs and nuts, just cause they're different. Cb is also like70mm, ours is 57, hence the spacer

oh and 8's pretty much never fit within the gaurds or a mk 1!

[GoLfMan]

cool retro as wheels cheap too!!!

[WABIT]

its hard to tell with these wheels whether or not you need diff wheel nuts, from what i can tell, they just look like normal ball seats that would suit standard mk1 wheel bolts...

[dom123]

soooo confusing

[WABIT]

Hi, the outer width of the rim is 7" and the inner
(inside tyre bead) is 6". Cheers

nuf sed, dom