A couple of questions: I pulled apart the centre console in my Polo 6C to install an extra USB socket in the dash, and along the way I dropped one of the torx screws into where the multimedia control unit goes, nowhere to be seen.

So my first question is, where can I buy a replacement screw?...

I recently acquired another MK5 GTI (can't help myself) and was set to replace the door lock actuator, so removed the door skin and then get to removing the M6 screws holding the actuator in place, but managed to round off the screw so that I can no longer remove the screws anymore.

...

I'm on the hunt for a wrecker with a 118TSI (I'm sure there should be lots of them!) to scavenge the PCV breather pipes to build myself an oil catch can. The idea is to make up the required parts without having to pull mine apart or sacrifice the ability to go back (should I ever need or want to)....

Hey guys,

Just noticed that the 2 screws holding down the ignition ramp are missing (previous owner).



I'm replacing soon the 4 spark plugs and I'd prefer to have the ignition properly secured.

Does anyone know what kind of screw size goes in there?...

Hi. I have read the posts on how to remove the SAI, but it does not go into finer detail on how to remove the 3 lugs (see pic) that slot into the SAI and screw into the ...
Can someone explain simply, how I remove those in order to remove and replace) the SAI.
Cheers, John...

OK - odd one. Mk3 Octavia owners, can you check your cars please?

I've noticed a rust bubble forming under the paint, immediately underneath the fuel-filler flap which originally looked like a stone chip. Upon closer inspection, it's actually a screw from INSIDE the rear wheelarch, which...

I have lost one of the plastic circular screw caps that cover the Torx screws for my Skoda Superb 3T DSG Sedan/Hatch (MY11). Below is an image. You can see the cap over the top screw and the cap missing from the bottom screw.

Any ideas what the part number for this is? Is there anywhere...

does anyone know if you can buy these 90deg barbs on their own. iv'e order 3 pumps from the wreckers for my son's T4. all identical ZF units, but all have these at different angle, and 1 had a screw on fitting. 1 i ordered from china had no barb at all, that's the way they sell them!
the barbs...

Can someone please tell me how to do this?

On the drivers side the assembly has one screw holding the cover on which I can remove partially, but unsure how to actually get at the bulb to change it?

Someone told me the under-tray has to come off...but I see no obvious or easy...

This might sound ridiculous, but is anyone here aware of any blindspots?

I was at a T-junction today and pulled out perilously close to another car that I simply failed to see driving left to right.

I don't think the pillars are particularly thick or the wing...

Looking at how to remove the front underguard attached to the front bumper? Without pulling something im
not meant to, is someone able to shed some light on how to get this off so I can screw a front lip into it? Wondering if it's attached to the whole front bumper or not?

cheers...

Guys,

I'm doing my rear rotors and pads.

There looks as if I need a special tool to screw the piston back into the caliper??

Any assistance will be appreciated.

Merry Xmas,
Cheers,
Luke

Hey guys,

So I have this torx bolt that has been stripped in my TSI. Is there anywhere to get a replacement for it? Please see pictures attached. I've looked up methods on how to remove it (i.e. cut into it so a flat head screw driver can fit), but if you guys have any other suggestions...

Hello,

My problem relates to a leaking brass fitting on the fuel injection pump, right next to where the return fitting/banjo is for the fuel. The Brass or zinc plated fitting looks to have a small allen key grub screw in it, possibly a mixing screw. I can not access it unless I take the...

Hi,

Have a MK7 GTI and would like to get under the centre console. 1. I think the ends of an accessory plug may have fallen through and 2. Would like to see about wiring in some more accessory plugs underneath to hide my dash cam power source etc. (Yes, very OCD about neatness) For once...