Well, 2009 Passat CC 2.0TDI with the 6-spd DSG - just noticed noise and a very slight vibration at idle. I understand the DMF is something that always fails around 150,000km.

This job is a little out of my league seeing you ideally need a lift for good access, and anyway, I'm too busy...

Hi all I have an r36 Passat. It's got 214,000km on it. Love it to bits. Done timing chains and replaced the gearbox already. Also did the flywheel. The car great service history, however I'm losing oil. I wouldn't say burning it. Don't notice any blue smoke etc. Service history is great. Last interval...

Hey,

First post here and probably one of many... I was reading erWIN for the removal of a sump on a 3.6 passat and saw it requires specialty tool T40159 to remove 3 bolts on the gearbox side (I believe its an extra long triple square round-head M8 to reach past the flywheel).
...

Hi guys i have this 2007 T5 citivan 1.9l diesel engine manual gearbox and need to replace clutch… I need to know if I need a dual mass flywheel kit or just a solid mass flywheel?? Cant find the information anywhere

Folk,
I'd be interested to hear experiences/comments concerning a recent diagnosis by a trusted VW mechanic.
I'd had a lightish chattering noise at idle (sometimes). It comes from the front, possibly passenger side, of the engine. I had the technician listen to it.
Diagnosis: The...

Hey guys.

Have a LUK clutch kit and flywheel off my Mk1 golf. has done <3k kms and looks like new. PM me if you're interested.

I've got a 2013 Polo 6r gti. It has a metallic rattling sound ONLY when accelerating around low revs. I've tried looking everywhere to locate it and can't seem to pin point it. The sound had gotten louder and louder over time. Having the car on a hoist and listening with a stethoscope is hard to pin...

Would anyone know of a good site/ company to buy a flywheel/ clutch kit?

My dual mass flywheel is worn and I was looking to replace it, so far I'm leaning to the single flywheel route.

I've seen Sachs dual mass kits go for $600-700ish and was wondering if anyone had any experience...

Chasing a clutch and flywheel kit that suits my new project, would prefer something heavy duty, I keep getting close but all the kits I locate stateside don't suit the 6 speed? Case of beer ($50 direct deposit) for someone who can point me in the correct direction and find the right listing...driving...

Hi Guys,

I was after some advise regarding a DFM failure. The car is a 2013 model, 100k, 7 speed DSG. It is just over 5 years old. I have had the clutch packs replaced under warranty at 40k, and again at 90k. At 100k, the 3rd clutch was beginning to shudder on take off and gear changes...

Hey guys,

My clutch has begun to slip (guessing it's the original, ~13X,000KM). Eg revs up but acceleration is not what it should be (worse than wife's getz)

Just wondering what the part no is for aus versions of the cars.

Quick googling/ebay searches has...

I have upgraded my clutch and flywheel on my 2015 6 speed manual and have my standard hardware for sale.

Both are in great condition and will work well for someone with a worn clutch.

Im happy to post Aus wide for $40 and welcome inspections.

Ill throw some...

Hi new to this, i have a mk3 vw golf tdi stock standard. join as i need to get some advice/input in to a problem with the manual transmission?? not certain. the problem started after replacing the clutch, flywheel, slave cylinder, rear main and a few seals and parts all genuine volkswagen, after doing...

Hey Guys,
I'm getting the Sachs SRE Performance Clutch installed in my car soon. Anyone who has done this can you please let me know if you replaced the flywheel or just used your original? It's a massive expense if not needed! I will replace the flywheel and pressure plate bolts with new items...

Click HERE to order or for more information.

VW 2.0T Clutch Upgrades -

Here are some frictional characters you can believe in.

ECS Tuning clutch kits let you restore the smooth clutch operation and performance you expect from your manual...