Hey Team - I had the dreaded ignition key jam issue with the wifes' golf last few days (likely due to the numerous heavy things hanging off her key chain...). Anywho internals were shot so ordered a new (non genuine) mech assembly as factory was going to be 4-6 weeks away.
After much swearing...

I've still got the original struts and rear shocks and my T6 has 290+k km. It's getting pretty bouncy.

I'm thinking about KYB replacements, I don't need anything fancy, just something OEM equivalent or better.

Questions are as follows:

What's access like...

Getting a really annoying rattle on fairly badly paved roads at speeds of 80km/hr and faster. It is definitely coming from the rearview mirror assembly on my 2016 VW Passat.
I can't seem to find any youtube videos on how to disassemble this component (and whether or not it's something I should...

Okay, have a replacement lens assembly (includes the bulb holder) now for the driver's tail wing side. Is there info anywhere on how to remove the old lens (cracked)?

Can anyone please tell me how to get the right side sliding door lock assembly off. I have removed the inner panel, taken off the handle and the torx behind the hinged side of the handle and the 3 screws holding the lock mechanism to the inner door, but seems to be holding on at child lock, but can't...

Hey all.
Sorry if this has already been answered. I am still getting familiar with the forum setting. I have a quick question about brake upgrades. I have a 2015 my16 66tsi and hoping to upgrade calipers. Do the 2015 gti calipers fit if i were to buy the hub assembly, caliper, lines, rotor, etc,...

Folks,

I've got a 2016 T6 and only left side reverse light comes on. There's a circuit and a globe in the right hand tail light assembly but no action when in reverse.

Do you have an Aussie T6 and if so do your reverse lights on both sides come on when in reverse?

So been getting intermittent error message on my dash that says "Error: workshop! Leave vehicle only when selector lever is in Position P.". It's usually not up for long enough to actually see.


Image curtesy of the internet. Mine is never up long enough to get a photo...

I have a BWA powered golf V and when I bought it, the air cleaner assembly was cracked by people ripping the cover off violently.

I ended up sawing off the MAF sensor and fabricating a pod intake with some 90mm PVC from Bunnings and some horribly cheap wrap from Supercheap.

...

Hi All.

Wondering if I can get some help identifying a part number or proper description for the T piece connector in the attached picture. I've been to the standard Repco/Autobarn stores, a European auto parts specialist store, a VW mechanical workshop, 4 different wreckers and the Volkswagen...

OEM R36 Passat complete front grill assembly $350

Removed from 2010 MY10.5 R36

In good overall condition. Some minor sandblasting from normal road use and there are 2 small cracks towards the bottom. Very hard to see when on the car and could easily be repaired with some...

Hey, If anyone has one of these laying around that you don't want let me know. Thanks


...

I am after a boot light assembly for a VW Golf 2003 mk4 hatch.

The wiring is there and only a clear plastic lens in the hole where the boot light would normally be.

Thank you.

I don't know if there is a better place to post this, but here I go. I've had an odd noise from the steering, only when I turn the wheel. It is mechanical and sounds a bit like a ratchet except with a little more resonance. It is not loud. I did not notice for a while as I had music playing. I took...

Hi

I'm looking for a polo n9 drivers side strut assembly complete for a short term. ??

I'm part way through a project build, I'm after the complete drivers side strut, wheel assembly down to the ball joint.
suspension tops not required. (I through out 3 on my last...