Test Thread

[The_Hawk]

This is a test to make sure there are no problems here... please ignore me and move along.

[NZTiguan]

moving along ..................................

[The_Hawk]

This is a list:

• Things
• More things
• Other things
• Brown Things

[The_Hawk]

This is a link:

http://www.vwwatercooled.com/forums/f98/corrado-1-8-16v-g-reg-97926.html

[The_Hawk]

• The dash already has cutouts for the OEM lights to just clip in for
  driver (near OBD port) and passenger.
• The kit comes with the wiring all done, just need to push the pin into
  the right place in the BCM connector.
• The BCM is located above the fusebox, under the driver's side dash (RHD
  vehicle).
• For 2008 mk5 based Tig it was connector B pin 7, for a newer mk6 based
  Tig it is connector B pin 50 - the bold sport website shows all the
  details.
• Dimming from the instrument cluster works great, OEM setup.

REAR footwell lights

• The rear footwell (front seats) don't have spaces for the OEM light units
• The LED strips lights from Jaycar (Australia) fit perfectly (can be
  screwed in to the seat bottom with small screws)
• I ran wiring together with the seat harness, then under the carpet, and
  along the door sills.
• The door sill trims just clip out (see OEM RVC install, same location)
• For the passenger side, you need to unclip the trunk release button
  which is easy when you know how. You need to undo and remove the small
  clip which sits under the handle, towards the front of the car.

Sturdy aluminium-encased LED strip light from Jaycar, part number ST3918.
Cost $40 for two. (or $30 ea singly). Comes with wiring and screws to
attach to the seat.

Linkable Aluminium LED Strip Light - Jaycar Electronics

[DeboDasAuto]

look at dat