If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
anyone know how to change Interior light?(Dome light)
if so can you please post up a DIY! or any link that show how to change Dome light?
Thanks alot!!
When you say dome light do you mean the central light that comes on when you open the doors, that also contains the individual map lights? If so you should be able to pop the whole plastic part out quite easily, it's in two sections. The front section (under the 'grill') hosts the alarm sensors so you can leave that there, the remainder clicks into a cable so when you pop it out you can disconnect that cable to work on it.
Are you just wanting to change one of the bulbs? They screw out from the top side from memory....
refer post #4, i tried explaining how to yank the light assembly out. also, the bulbs can be removed by turning the 'button' (that holds the bulb) 90⁰ and then just pull out. you can see it at the top right in the picture there.
Tweet
Comment