Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

KO4 Turbo review

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • You have to knock 1000mb off that log Pedro. It is reading ambient pressure as well. You'll notice the difference tomorrow.

    Gavin
    optimumcode@gmail.com | https://www.vwwatercooled.com.au/for...i-;-79012.html | https://www.facebook.com/TTY-Euro-107982291992533

    Comment


    • Ah true i forgot about that!

      Comment


      • sorry to bring back an old thread... I noticed some users said you only need a K04-001 turbo & 4 FPR to do this upgrade?

        What about the tune? Is that required? How will the turbo/car run without a tune?

        Especially if the car is already stage 1 flashed?

        D

        Comment


        • New tune required. Some options require injectors as well

          Comment


          • Originally posted by noone View Post
            New tune required. Some options require injectors as well
            Interesting, FrankenTurbo are saying in reference to bolting on a F4H-T "fter installation you can drive the car indefinitely on your current tune. You would need to retain your existing fuel injectors and MAF housing/sensor until the time came to upgrade the ECU"

            I cannot see how the K04-001 would be any different.

            Who is your source Noone?

            I would like to compare the feedback given so i can make an informed decision on what i am going to do with my Polo.

            D

            Comment


            • I think that even the 4bar FPR on itself would need a new tune so you wont have problems with fueling.

              Comment


              • no fpr no injectors then Just turbo.

                Comment


                • If you just do the turbo it will work with your v1 tune fine. You just wont get the extra out of the turbo, which is the point of putting it in...
                  You also don't 'need' upgraded fuel injectors or MAF. It all depends on who you go with for the tune. I went with APR and just replaced the turbo and 4bar FPR.
                  03 MkIV GTI - K04-001, APR 2.5" TBE/TIP/Software, Forge FMIC, GFB DV+, Powergasket+, Dark Tint, 17" Bora Sport, Bilstein shocks, Eibach springs, BMC CDA, Dieselgeek SS, Hella Celis, R32 Alloy Trim...
                  95 MkIII VR6 (sold)

                  Comment


                  • Tassie what are your thoughts on the K04 ??, can you really notice it??

                    Was it worth the change

                    Cheers
                    MODS- TOO MANY

                    Comment


                    • Sorry, I did not elaborate.

                      Yes you likely can, but as others have chimed in, won't really see the extra power. A tune is required to get the proper power from the new boost curve available.

                      Have a look at the APR and Giac options, speak to Gav @ CC.

                      Comment


                      • Originally posted by vwthunder View Post
                        Tassie what are your thoughts on the K04 ??, can you really notice it??

                        Was it worth the change

                        Cheers
                        Yes I can notice it. But I only had a K03 not a K03s so I can't know if you would notice as much of a difference.
                        I had just got the FMIC on a month before and was a bit depressed with the increased lag. It felt like there was nothing at all until 2000rpm and that really annoyed me as when cruising at 1800 before the FMIC it had a nice response for general speeding up or whatever.

                        Anyway, I got the turbo on and noticed it actually has less lag. Pulls not hugely, but has noticably more torque from about 1600 and just builds nice and steady until 2k then it really starts moving, just always feels like the car is ready to go. It just feels like a much more solid and responsive car. Tried one fast take off, could feel the axel tramp and spins the wheels. But really that's not the point of it, it's the in gear acceleration that I love. Overtaking is so much fun!

                        It makes for a much nicer car to drive daily. I love the turbo wistle and it makes the DV louder too. I grin everytime I drive it. My feul consumption has also reduced dramatically. On the highway it used to average around 7.2L/100km now it's in the low 6s. And city it's around 8.5L/100km.

                        Would I do it again? To a Mk4 GTI, in the blink of an eye.
                        Last edited by TazzyVR6; 26-10-2010, 04:17 PM.
                        03 MkIV GTI - K04-001, APR 2.5" TBE/TIP/Software, Forge FMIC, GFB DV+, Powergasket+, Dark Tint, 17" Bora Sport, Bilstein shocks, Eibach springs, BMC CDA, Dieselgeek SS, Hella Celis, R32 Alloy Trim...
                        95 MkIII VR6 (sold)

                        Comment


                        • Originally posted by TazzyVR6 View Post
                          Yes I can notice it. But I only had a K03 not a K03s so I can't know if you would notice as much of a difference.
                          I had just got the FMIC on a month before and was a bit depressed with the increased lag. It felt like there was nothing at all until 2000rpm and that really annoyed me as when cruising at 1800 before the FMIC it had a nice response for general speeding up or whatever.

                          Anyway, I got the turbo on and noticed it actually has less lag. Pulls not hugely, but has noticably more torque from about 1600 and just builds nice and steady until 2k then it really starts moving, just always feels like the car is ready to go. It just feels like a much more solid and responsive car. Tried one fast take off, could feel the axel tramp and spins the wheels. But really that's not the point of it, it's the in gear acceleration that I love. Overtaking is so much fun!

                          It makes for a much nicer car to drive daily. I love the turbo wistle and it makes the DV louder too. I grin everytime I drive it. My feul consumption has also reduced dramatically. On the highway it used to average around 7.2L/100km now it's in the low 6s. And city it's around 8.5L/100km.

                          Would I do it again? To a Mk4 GTI, in the blink of an eye.
                          Just a note - if you install a FMIC & get a loss of boost, it's best to remove it & go back to standard. The issue people have had with Polo GTI's (With K03 & K04) trying to make an extra 4psi of boost to cope with a bad intercooler is not a long term prospect. A good intercooler will lose no boost & create no lag - it should actually make it better.
                          sigpic

                          Comment


                          • Originally posted by Guy_H View Post
                            Just a note - if you install a FMIC & get a loss of boost, it's best to remove it & go back to standard. The issue people have had with Polo GTI's (With K03 & K04) trying to make an extra 4psi of boost to cope with a bad intercooler is not a long term prospect. A good intercooler will lose no boost & create no lag - it should actually make it better.
                            Sorry Guy, without buying a APR intercooler, what about using the existing forge piping and getting a good quality core made up ??
                            MODS- TOO MANY

                            Comment


                            • I've tried to get some interest in this, think getting a batch done right would do the Polo some good. It would seem the Forge units kill a bit of boost. I still prefer it, summer is too hot for the stock cooler and a tune.

                              Comment


                              • Originally posted by noone View Post
                                I've tried to get some interest in this, think getting a batch done right would do the Polo some good. It would seem the Forge units kill a bit of boost. I still prefer it, summer is too hot for the stock cooler and a tune.
                                If you could get a good quality core made up, maybe use it with existing piping, or sell the forge kit and make up your own plumbing

                                Maybe it will be hard to sell the forge kits after this
                                MODS- TOO MANY

                                Comment

                                Working...
                                X