RCD510 install pics

[danntsi77]

hi,

So does yours do GPS as well? I have the RCD510 already in but thought they couldn't do GPS? Are you able to advise what I would need to do to make it GPS as well?

Thanks muchly...

The RNS510 is the factory system with Sat nav built into it plus DVD movie playback......

As for the RCD510 it is only a 6 disc CD stacker with an SD card reader..........
From what i have seen around on the net some units have an AV input for a reverse camera.......this unit can be used as well for other AV input devices but i do not know the finer details....

[mr_bzr]

Did not have access to trim removal tool. Credit card was too soft for me.

What I did in the end was use a thin butter knife wrapped it about 3 times in glad wrap and carefully slide it in the gap. No scratches or anything at all.

After that its simply reattaching the wires.

People who are doing this once again don't forget to pull up the locking clips on the cables.

[tay113]

HI michael, wonder if i can get any help to install the rcd510 once i get it asap.
thanks tay

[mr_bzr]

yah, we can organise something. When is your car due? Its really quite simple, 10 min. But I'd be happy to help.

Michael

[tuan0011]

I have factory bluetooth, does anyone know if changing to this unit will affect that?

[readerr0r]

I have factory bluetooth, does anyone know if changing to this unit will affect that?

Should be all fine with the bluetooth, just plug and play when it comes to factory installed stuff.

[calebo]

Hi guys,

I've got a MY12.5 90TSI with park assist, would it be the same to installing the RCD510 plug&play without any configuration?
As my current RCD310 has a visual display of the parking sensors when I'm reversing/parking.

[readerr0r]

Hi guys,

I've got a MY12.5 90TSI with park assist, would it be the same to installing the RCD510 plug&play without any configuration?
As my current RCD310 has a visual display of the parking sensors when I'm reversing/parking.

Yes all should be well, just make sure you get a newish RCD unit built around 2011/2012

[gavs]

The RCD 510 would need to be coded to accept the input signals of the OPS system, yes.

[readerr0r]

The RCD 510 would need to be coded to accept the input signals of the OPS system, yes.

My bad I forgot that it still needed to be coded into the unit and that it doesn't just use the Cent Elec. Installed list.

[calebo]

The RCD 510 would need to be coded to accept the input signals of the OPS system, yes.

Where can i find more info on doing that?

[gavs]

On a VCDS system. You will already have the OPS system activated in the coding but you would need to have a look in the radio control module to see where in the adaptations you would need to activate it. Sorry if that sounds confusing but with the VCDS system in front of you, it would make perfect sense

[Blair]

Hi guys,

I've got a MY12.5 90TSI with park assist, would it be the same to installing the RCD510 plug&play without any configuration?
As my current RCD310 has a visual display of the parking sensors when I'm reversing/parking.

I just replaced my RCD 310 with a RCD 510 and the park assist/OPS system works perfectly on the RCD510 display, no coding required was just a straight swap. However my AUX has stopped working ( all activated in VCDS), thinking it may be a wire issue??

[shauno]

I've done this twice on a MkV Golf, and the whole top section of the dash/vents/etc needed to be removed.

Amazed at how simple the process is on the 6R - just one piece of trim!

[Fatherless One]

Did this today, couldn't have been easier, BT streaming is now has CD-like clarity