Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

GTI 6C initial impression

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GTI 6C initial impression

    Just bought a 2016 Polo GTI after selling my Revo Stage 1 Golf MK4 GTI.
    Chalk and cheese driving wise, but I do find the Polo runs out of puff quite early in the rev range.
    I find I am rowing through the gears to get to 100, whereas the golf used to love 2nd gear all the way through to 100.
    Also flooring the Polo I get a lot of torque with very little push on the accelerator and hence a lot of wheel spin.
    Would a tune make the wheelspin worse (I know more power means more likely) but have any tuners been able to smooth out that curve a little?
    Any thoughts appreciated
    MK4 GTI Revo Stage 1 / BFI Dogbone Mounts / 710N DV

  • #2
    Hey mate - the 2016 model will be 1.8T Polo correct? See screenshots below showing the difference you can expect between stock and stage 1. https://www.facebook.com/TarmacEngineering/

    What these Polo's really need to help reduce the wheel spin is a dog bone mount insert which stops the engine moving as much under load and therefore helps reduce wheelspin. Good cheap mod. HP Dog Bone Engine Mount Insert - Race - VW Polo 9N/6R, Skoda Fabia/Roomster - Harding Performance

    Dont forget that your Mk4 Golf GTI would have been a 5 speed, and the Polo GTI is a 6 speed so the gears are a bit shorter hence why you need to hit 3rd gear to get to 100kph (my Golf R was the same, needed 3rd gear to hit 100kph because 2nd would only get to to around 95kph).

    Click image for larger version

Name:	Polo GTI.jpg
Views:	1
Size:	167.9 KB
ID:	1851323

    Click image for larger version

Name:	Polo GTI dyno.jpg
Views:	1
Size:	128.7 KB
ID:	1851324
    2017 Ford Fiesta ST the go kart

    2015 Audi SQ5 bi-turbo V6 TDI family hauler

    Comment


    • #3
      [QUOTE=Lucas_R;1312544]Hey mate - the 2016 model will be 1.8T Polo correct? See screenshots below showing the difference you can expect between stock and stage 1. Tarmac Engineering - Home | Facebook

      What these Polo's really need to help reduce the wheel spin is a dog bone mount insert which stops the engine moving as much under load and therefore helps reduce wheelspin. Good cheap mod. HP Dog Bone Engine Mount Insert - Race - VW Polo 9N/6R, Skoda Fabia/Roomster - Harding Performance

      Dont forget that your Mk4 Golf GTI would have been a 5 speed, and the Polo GTI is a 6 speed so the gears are a bit shorter hence why you need to hit 3rd gear to get to 100kph (my Golf R was the same, needed 3rd gear to hit 100kph because 2nd would only get to to around 95kph).

      Yeah mate the 1.8T.
      Good point re dog bone.
      I fitted one to my old Golf for the same reason.
      So long ago I had forgotten!!
      MK4 GTI Revo Stage 1 / BFI Dogbone Mounts / 710N DV

      Comment

      Working...
      X