If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
turns out that both the front and rear are in the region of 395mm. Hope that helps.
Hi Anthony,
The catalogue listed Eibach Pro Kit will lower the sedan to approximately 350-355mm center of wheel to guard as per the picture attached. Is this stance appropriate ?
The catalogue listed Eibach Pro Kit will lower the sedan to approximately 350-355mm center of wheel to guard as per the picture attached. Is this stance appropriate ?
[ATTACH=CONFIG]39642[/ATTACH]
yep, cheers that is good info - that the off-the-shelf kit will result in that stance. I think what visually makes that particular vehicle appear lower is the larger diameter wheels and tyres - makes it ‘look’ lower than it possibly is.
what about sway bar (rear,.?) and is there part # and how to buy.? $
Hi Lenny,
Turns out the rear sway bar is ex-production due from completion in mid December.
The earliest I can organise to have here is by mid to lat March with our stock orders.
Pricing I expect to be around $428
Could I order the springs through a local Tassie outlet? Should I specify a kit or part numbers? Or if I buy through the ‘eibachdirect.com.au’ site, does that come though your company?
what;s your first name anyway - be nice to addresss you by name
I really appreciate you you help and advice - you have been great to members of this forum, openly helping with your knowledge.
Could I order the springs through a local Tassie outlet? Should I specify a kit or part numbers? Or if I buy through the ‘eibachdirect.com.au’ site, does that come though your company?
what;s your first name anyway - be nice to addresss you by name
I really appreciate you you help and advice - you have been great to members of this forum, openly helping with your knowledge.
Hi Anthony,
I have just sent you a PM as I don't want to disturb the forum rules.
Lenny, I noticed you mentioned your vehicle is 206R , is it a sedan or wagon ?
Anyways the front ride height achieved after installation will come to approximately 350-355mm. However if this is too low there may be other non listed options that we can look at. Attached is a photo of sedan that will provide a good idea on front ride height.
Hi, I have a Passat B8 2.0TSI with DCC. I want to lowering the car, 20mm/20mm front/back. The Eibach team recommended me Product code:
E10-85-041-04-22. What do you think about it? Will be too lower? And with DCC, could it be ok? Thanks
I use R17 for track day... all days wheels are R18
Last edited by gruggeri; 22-04-2019, 08:47 PM.
Reason: word error
Finally the Eibach Pro-kit (E10-85-042-02-22) is in!! woOot ��
Its less wallowy (boat like) now in Normal mode. It's good now.
Sport mode is nice n firm. Comfort mode is still comfortable ��
I have DCC shocks.
Lane Assist, ACC, TJA, etc. etc. all seem well and still behaving as before. Xenons need a slight lift.
but otherwise all good.
Before - 690mm from wheelarch to ground (front & rear)
After - 670mm from wheelarch to ground (front & rear)
or if measuring from wheelarch to centre wheel cap - 350/340mm (front/rear)
Should drop another 5mm or so in the next few weeks.
I'm very happy with it.
Not too much.
Not too little.
Top half of each pic is After.
Bottom half is Before.
MY17 Superb 162TSI, Business Grey, Tech+Comfort Pack, APR ECU+TCU Stg 1, SLA, Rieger Splitter + Side Skirts, Eibach Pro-Kit Springs, Hardrace Swaybar, TPMS
sigpic
The Eibach Pro Kit has completed the car nicely, glad to know you are satisfied.
If anyone else needs assistance with suspension please let me know, happy to help !
I notice on some sites that the springs Eibach E10-85-042-02-22 doesn't fit my particular car i.e 2016 Passat rline 4motion 2.0 litre BiTDI sedan while on others it does. Should I be worried about it?
Tweet
Comment