Tweet
Well, today I installed some LED parkers for my R36. The reason behind doing, well one of my parkers blew, and when I went to super cheap, they wanted $8 for a pair of SCA branded plain jane ones and I thought that I would investigate LED's. Well obviously my search led me to ebay so I did some searching around. Unfortunately there were some Taiwanese sellers that I would've bought from except they are on Chinese new year so I don't know when they were back and I really couldn't be bothered waiting so I found an Australian seller for similar prices. Now, they aren't the best thing to look at but you really can't see them unless you get right down to the parker light. They are slightly bluer than what I was actually hoping for but they suit the xenons so I am happy for now. Here is the seller I bought them off, and best of all, they don't throw an error back on the dash saying that there is still a blown bulb so the canbus error selling point is valid. I realise that there is probably other threads on this but I actually found it hard to see anything because no one would post where they actually bought LED's from so here is the link.
2 PCS T10 LED Super White Canbus Error Free Number Plate Light Bulbs | eBay
To gain access to the lights there is a panel with two wire looking clips on the top and bottom. Just flip them up or down depending on whether they are on the top or the bottom of the panel. Once open, there is a really dark grey flat plastic piece that acts like a pencil extension for the actual bulb. There will be two black thin wires to it so you can't miss it. Gently pull it out and you will see the bulb on the end. Simply replace the T10 bulb with the LED and make sure you check that the bulb works by turning on the parker. If it doesn't, flip the LED around as you have to swap the polarity. Check again, then reinsert the bulb back into the headlight. Now this can be a bit of a pain but you'll get there. In my car, the holder doesn't really feel that secure so don't worry about that. Once in, return the black panel on the back of the headlight assembly and you are done. Easy cheap mod!!
Here are some pics including comparisons. Sorry but they are the best I could do with a phone. Any questions, please ask. For any others out there that have replaced anything with LED's on their passats, please share the link that you bought them from so we can all share in the wonder of LED's.
Leon
2 PCS T10 LED Super White Canbus Error Free Number Plate Light Bulbs | eBay
To gain access to the lights there is a panel with two wire looking clips on the top and bottom. Just flip them up or down depending on whether they are on the top or the bottom of the panel. Once open, there is a really dark grey flat plastic piece that acts like a pencil extension for the actual bulb. There will be two black thin wires to it so you can't miss it. Gently pull it out and you will see the bulb on the end. Simply replace the T10 bulb with the LED and make sure you check that the bulb works by turning on the parker. If it doesn't, flip the LED around as you have to swap the polarity. Check again, then reinsert the bulb back into the headlight. Now this can be a bit of a pain but you'll get there. In my car, the holder doesn't really feel that secure so don't worry about that. Once in, return the black panel on the back of the headlight assembly and you are done. Easy cheap mod!!
Here are some pics including comparisons. Sorry but they are the best I could do with a phone. Any questions, please ask. For any others out there that have replaced anything with LED's on their passats, please share the link that you bought them from so we can all share in the wonder of LED's.
Leon
Attached Files
Comment