If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Wonder if there's any V1.0 units floating around that can be had for cheaper...runout to make room for V.0 stock?
Are there any other dealers in Aus/NZ?
Wonder if there's any V1.0 units floating around that can be had for cheaper...runout to make room for V.0 stock?
Are there any other dealers in Aus/NZ?
I run 37PSI (~255kPa) for day-to-day, mostly driver only to/from work.
Family trips 40PSI (~275kpa)
I normally leave it on the middle settings for average daily use and most of the time I set it to the lower setting so it’s not too bouncy running over speed humps etc
————————————————————
Black Wolfsburg with panoroof arrived late Feb 2019. Yes, it’s a wicked colour & well worth the wait.....[emoji7]
Black Wolfy with Panoroof on order - Arriving mid Jan......
They definitely can, some apps don't seem to work properly which is why coding it is the best way to go using pro.
Sent from my SM-N950F using Tapatalk
I have the Pro and it wont work if the vehicle doesnt have the required hardware.
The lighting is white only in the doors and footwells as I tried again and it did the 10 colours but only in the headunit and AID. I have read elsewhere that this is so.
If the stuff isnt there even coding wont make it work
If you get it to work kindly post how you did it because on worldwide forums it says the LED's are only white
2021 Kamiq LE 110 , Moon White, BV cameras F & B
Mamba Ebike to replace Tiguan
I have the Pro and it wont work if the vehicle doesnt have the required hardware.
The lighting is white only in the doors and footwells as I tried again and it did the 10 colours but only in the headunit and AID. I have read elsewhere that this is so.
If the stuff isnt there even coding wont make it work
If you get it to work kindly post how you did it because on worldwide forums it says the LED's are only white
I was under the impression you were talking about the AID and head unit colours and not the white LED's.
You are correct that there is no way to change these.
Comment