Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Offroad information doesn't work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Offroad information doesn't work

    I actived the offroad information of my tiguan(280 CL /2018 mk2) with obdeleven.But the compass and meter didn't work.Could anyone know how come it is?Please help me to figure it out.Thanks in advance.
    The photo I got yesterday is as below:



    從我的iPhone使用Tapatalk 發送

  • #2
    You may have to also activate compass and altimeter (unsure how)

    What country are you in- if an Asian country, some of them don’t utilise compass (maybe altimeter too)

    Does the gps (if an option) show n/s/e/w orientation?

    Comment


    • #3
      Originally posted by Simonr23 View Post
      You may have to also activate compass and altimeter (unsure how)

      What country are you in- if an Asian country, some of them don’t utilise compass (maybe altimeter too)

      Does the gps (if an option) show n/s/e/w orientation?
      I live in Taiwan in Asia.
      And the gps doesn't show n/s/e/w orientation.Do you know how to activate compass and altimeter?


      從我的iPhone使用Tapatalk 發送

      Comment


      • #4
        Assuming you have the hardware installed (I’m now doubtful)

        With vcds/obd11, go to module 17(instruments), long coding, byte 10, bit 6- enable(compass).

        Perhaps there’s more to it, but it’s all I’m aware of.

        Goodluck.

        Comment


        • #5
          Originally posted by Simonr23 View Post
          Assuming you have the hardware installed (I’m now doubtful)

          With vcds/obd11, go to module 17(instruments), long coding, byte 10, bit 6- enable(compass).

          Perhaps there’s more to it, but it’s all I’m aware of.

          Goodluck.
          Thanks for your information.I will try it later.


          Sincerely Yours

          Marty

          Comment


          • #6
            Originally posted by Simonr23 View Post
            Assuming you have the hardware installed (I’m now doubtful)

            With vcds/obd11, go to module 17(instruments), long coding, byte 10, bit 6- enable(compass).

            Perhaps there’s more to it, but it’s all I’m aware of.

            Goodluck.
            Unfortunately,it can't be enable.Anyway,thanks for your help.


            Sincerely Yours

            Marty

            Comment

            Working...
            X