Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

162 TSI R line in at Underground Performance for Stage 1 tune up

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by FastMitch View Post
    Is there a dyno graph on the Torque (Nm) ?
    For anyone looking in the future, all dynos measure wheel power. Anyone quoting flywheel numbers, those are calculated.

    The graph posted has lines with dots on, this is the torque and referenced off the right han vertical axis. Power has no dots and is referenced off the left hand vertical axis.

    It is easy to return the ECU to the stock file. Whether VW go looking for a tune would depend on the nature of the potential claim.
    optimumcode@gmail.com | https://www.vwwatercooled.com.au/for...i-;-79012.html | https://www.facebook.com/TTY-Euro-107982291992533

    Comment


    • #17
      Originally posted by h100vw View Post
      It is easy to return the ECU to the stock file. Whether VW go looking for a tune would depend on the nature of the potential claim.
      Intel says it will detect a flash of the ECU as soon as it is plugged in during service and will flag it against engine and drivetrain warranty automatically now.

      You are right that this won't impact warranty on any claim outside of engine and drivetrain.

      Sent from my SM-N950F using Tapatalk

      Comment


      • #18
        Do you know in what gear these figures were obtained.

        Gearing will affect both KW and NM figures.

        Thank you.
        David

        Sent from my SM-N950F using Tapatalk
        Last edited by tigger73; 11-06-2018, 03:18 PM.
        Ordered: 2017 build date Tiguan 162 TSI Highline with DAP in Tungsten Silver and rear luggage tray. ETA: late April / Early May. I did not have to wait. I took delivery on 11 March 2017.

        Comment


        • #19
          Originally posted by Delewin View Post
          Do you know in what gear these figures were obtained.

          Gearing will affect both KW and NM figures.

          Thank you.
          David

          Sent from my SM-N950F using Tapatalk
          4th which is normal for most dynos. Tyre pressures and a heap of other variables come into play as well. However, this was flashed in situ on the dyno after the stock run. So eliminating much of that.
          optimumcode@gmail.com | https://www.vwwatercooled.com.au/for...i-;-79012.html | https://www.facebook.com/TTY-Euro-107982291992533

          Comment


          • #20
            Originally posted by Hole46 View Post
            Don’t forget, the other etuners tune also read 10kw atw less for the stock reading. Different dynos, different time, etc.


            Sent from my iPad using Tapatalk
            Correct. The other tig etuners did which had only 200km on the clock made 125 stock.

            Underground use apr and sister company of etuners..

            New car should not have a sticky Watergate.

            That intake mod they did was cutting out the stock airbox passenger side holes.. Not a good idea as with heavy rain can get water into the intake. The air normally goes from the drivers side and has a section for water to drain before going to intake.
            Last edited by INASNT; 18-06-2018, 11:51 AM.
            Tiguan Gen2 162TSI Etuners IS38 Stage 3 238.6 kw@4 wheels

            Comment

            Working...
            X