I see lots of talk of High line reversing cameras , need help wiring a low line one.

[Sioo7]

Ive bought all the bits from VW to do the job i just need pin information on the camera plug
Red assuming 12+
Yellow im not sure about ?
and brown assuming Chassis ground
can anyone confirm ive got this right ?
thanks

[The_Hawk]

http://www.vwwatercooled.com/forums/f130/rearview-camera-install-highline-93622.html

Enjoy

[Sioo7]

Thanks for that Hawk.
Im fitting the low line model to a RNS 315 head unit. I will add a full DIY write up. The cost of all the OEM parts direct from VW accept the camera came to £45.00 and then im using a 1T0 980 551 camera. This will fit into the 2H0 980 561 camera cover with a bit of fetling. The Camera came from German ebay at a cost of £65.00 Ive worked out the camera power and reversing trigger connections and made my own harness. ive already marked out and cut the Rok to accommodate the Camera holder. so tomorrow i will dismantle the car and run the loom and install everything. Then all that will be left to do is connect it to VCDS and initialize it. So all being well the whole retrofit should have cost no more than £115.00 The extra £5 is for a tinny to celebrate.