If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Hi all been a while i bought some LED dring lights (Dually2s) thw trouble im having is when i hook them up they work fine but the right front blinker comes on solid aswell just hoping some else had this issue & found a solution thanks guys & girls
That seems like a very odd combo, my first thought would be a short in the wiring somewhere due to something not being wired up correctly or bent, worn etc.
Does the driving light light up when you turn on the right blinker?
Are you getting bulb out errors?
If it has an engine or heartbeat it's going to cost you.
Hey hawk thanks for replying i worked out id hooked up to wrong wire. As i read wrong on net that black wire with green strip was high beam but it's actually white wire
Hey hawk thanks for replying i worked out id hooked up to wrong wire. As i read wrong on net that black wire with green strip was high beam but it's actually white wire
Hey smok3y, I am about to put a small light bar on my wife's 118. I've had a look at the harness on the back of the headlight but don't know which is highbeam. Is is a straight white wire? Any chance of a pic of where you spliced in?
Comment