Best number plate / plate holder style

[Rob_R]

Well done Rob_R. Really like your color coded scrivet solution. It reduces the visual bulk nicely. Mine will be united grey so color coded scrivets should blend in well, so I think I'll try this before buying the Lakin bracket. Did you use a spray can of touch up paint? Did you paint them before or after fitting them?

Thanks ScottR. My solution isn't to everyone's liking but short of having bumper filled and resprayed it does nicely. I've yet to have anyone make comment about it if they don't know I've done it. I had an auto paint shop make me up a can of RB paint and I also bought a can of clear coat. I prepainted and clear coated them before fitting. I highly reccomend the Lakin setup. I've yet to see a better system.

[langers_sydney]

OK, so it's a sideview and the premiere of my car on Watercooled, but here she is fresh from a detail and Lakin installation

[Rob_R]

OK, so it's a sideview and the premiere of my car on Watercooled, but here she is fresh from a detail and Lakin installation

Bout time langers, lol. Looking sweet.

[langers_sydney]

Bout time langers, lol. Looking sweet.

Thanks Rob, yes mate, terribly sorry about the delay in posting pics there, y'see the wife went and got herself pregnant and I was unable to find time to polish the car due to hospital trips

I did say to her 'But love. I need to polish the car for Rob_R' but she mentioned something about 'Needing a tin of Gherkins' and legged it without so much as a 'by your leave.


LS

[Rob_R]

Thanks Rob, yes mate, terribly sorry about the delay in posting pics there, y'see the wife went and got herself pregnant and I was unable to find time to polish the car due to hospital trips

I did say to her 'But love. I need to polish the car for Rob_R' but she mentioned something about 'Needing a tin of Gherkins' and legged it without so much as a 'by your leave.

LS

LOL!! Doesn't your wife realise you already have a baby!!

[Ryan41]

silly question, but whats the point of the lakin plates? You can still see a black empty plate? yer it might be thinner, but the big black mess is still there? I ended up just going euro's and bolting them straight onto the standard mounts.. I had my original set of personalised plates but I hate the black all together..whether its thin or think? I may be missing something though so dont have a go at me haha.. just curious as to why you guys are spending money on them?

[Corey_R]

I presume you're talking about the front bracket? Like what AdamD, MIRSAD, langers, and myself have? Because it looks much better than the stock holder, and is the smallest option, whilst using the stock holes, and not having to use "plugs" or have the bumper filled and resprayed. Additionally, they seal the plate and don't allow dirt in and all that.

Since they're completely custom, you can also do what Rob_R did, and have it the exact same size as the plate, but you then either need to use plugs on the stock holes, or have the bumper filled and resprayed.

But it's basically a case of ANYTHING to get rid of this monstrosity:

Most plates don't fit it properly. It's a flat colour grey and doesn't match the gloss black of rest of the front (on the R at least). It also actually hangs below the central intake area and blocks some of the air to the radiator/intercooler (on the R).


Check that out, not only is it really bulky, but it's still curved, so you still have to bend your plate for it to fit, and if you have a cover, then you've got no choice but to have it sticking out on each side like this.

[Qtip]

2 things i hate with a passion, cheesy WA euro plates and crappy euro plate holders.

seeing as i couldnt order my R without the plate holder i had the front bumper shaved and filled. cost a pretty penny but it was worth every cent IMO

[Corey_R]

It looks good Qtip. The covers that Lakin use are a bit nicer cause they don't have those clips which go around the back and over the top/bottom to the front, but front the distance photo, you can hardly tell.

[Ryan41]

that looks great "Qtip"! , what did they charge you for the work?

[Qtip]

cheers guys. it was a $500 cashy job. pretty exy to fill 4X 5mm holes but theres a sh*t load of labor involved to remove the bumper, grills, DRLs etc so thats where the cost was


as for plate covers, yeah i might look into those ones

[Ryan41]

cheers guys. it was a $500 cashy job. pretty exy to fill 4X 5mm holes but theres a sh*t load of labor involved to remove the bumper, grills, DRLs etc so thats where the cost was


as for plate covers, yeah i might look into those ones

thats pretty cheap! It must have made you sick pulling a brand new painted front bar off and getting it worked on/ re-painted though! haha.. Should have waited til the wife scraped some driveways and gutters first haha

[langers_sydney]

Looks great Qtip.

But you're not a real man until you have taken a black and decker powerdrill to your $70K car, the adrenalin rush is palpable.

[Qtip]

Looks great Qtip.

But you're not a real man until you have taken a black and decker powerdrill to your $70K car, the adrenalin rush is palpable.

Dewalt count?

[Corey_R]

It sure does man!