Best number plate / plate holder style

[Corey_R]

Not at all... they are literally CUSTOM brackets. So you can order whatever size bracket, to be mounted however you can think of (within engineering and legal reason of course).

[MiiLos]

Ok, so when i order the front Euro Std bracket for the GTI the full size euro will fit fine? I thought it only fits the slim euro as per your install Corey.

Ill be calling Lakin on Monday to order a set and hopefully have them delivered directly to my dealer as the dealer wont let me take the car home with the plates stuck on via 3M tape as apparently its not RWC for them not to be screwed in. They have offered to fit the brackets for me though if i can get them to them before pickup on Thursday.

[Corey_R]

Custom means he customer builds each order to the specifications required by your places, your car, and your desired fitted style.

Just give him a call, tell him what you need, and he'll take care of you.

[MiiLos]

thanks mate, ill give him a call tomorrow/monday and place the order. hopefully the dealership does a good job installing the brackets/covers..

[Glennb]

thanks mate, ill give him a call tomorrow/monday and place the order. hopefully the dealership does a good job installing the brackets/covers..

The Lakin Euro std plate fits the Vic Euro plates just fine, but call him and confirm everthing first to make sure you get what you need.
The front plate takes the place of the OEM plate holder, so make sure your dealer takes this off first, and from memory i think the Lakin plate goes straight into the same holes for mounting.

The rear Lakin plate still needs to be screwed onto the car though i think.

[Corey_R]

GlennB, there are two size vic front Euro plates... but again, the brackets are CUSTOM MADE FOR EACH ORDER. I'm talking about custom made "to the mm" (yes, millimeter) of the plates for your order. So they'll fit whatever you need...


And yes, there are no mounting holes on the rear of the Golf. The benefit of the Lakin bracket there is that the 4 holes made can be within the "boundary" of a non-euro rear plate and that the cover seals to the bracket, so you should never get water and dirt between the plate and the cover.

[Rosey456]

Why bother with lakin plate covers??
My R has full sized euro plates & the dealer fitted the covers and it looks perfect!!
Cost = $0
too easy
Why is everyone so concerned? I don't get it

[Corey_R]

I'd answer that but seriously... if you're not interested enough to look back a few pages to see the last time it was explained, then you probably don't care what the answer is anyway

Each to their own man. Your last post was saying how you don't get LED lights either. Earlier you claimed that you thought the Bridgestone RE050's were excellent didn't understand why people would want to change them. If you're happy with your car the way it is, then be happy and don't stress over it

[magellan]

Ok, so when i order the front Euro Std bracket for the GTI the full size euro will fit fine? I thought it only fits the slim euro as per your install Corey.

Ill be calling Lakin on Monday to order a set and hopefully have them delivered directly to my dealer as the dealer wont let me take the car home with the plates stuck on via 3M tape as apparently its not RWC for them not to be screwed in. They have offered to fit the brackets for me though if i can get them to them before pickup on Thursday.

Hey MiiLos, let us know how they go fitting your brackets. Your about one month ahead of me and I will probably have to get them to fit my brackets as well if they won't just tape them. At least I know they are gaining some experience in fitting them.

[MiiLos]

Hey magellan, did you order through Barloworld too?

I placed the order for full sized Euro brackets and covers (front and and back) through Philip at Lakin plates today. I know its been said time again, but Philip is fantastic to deal with, very helpful and he gave me the VWW 5% discount . He said he'll get the goods to Barloword by Wednesday also which is perfect considering such short notice.

I think I'll ask Barloworld to install the brackets myself before driving off on the day of pickup, Philip suggested I either watch them put the plates on or do it myself there as you never know what sort of care the guy installing them will take.

I'll post some photos up on Wednesday/Thursday.

[Corey_R]

Yeah, I'd recommend being involved in the process. One of the things I've seen far too many times is crooked numberplates...

[langers_sydney]

Doing mine myself. Lakin stuff is in the cupboard along with 3M double sided tape to get home with. Looking fwd to the diy job. Philip has provided a template and the instructions on this thread give me confidence. Will be fun.

[MiiLos]

Wish my dealership would just let me drive the car home with the 3M tape holding the plates up.. Would prefer to do the installation at home myself, but don't really want to get into an argument at this stage so I'll just grit my teeth for this one I think.

[magellan]

Hey magellan, did you order through Barloworld too?

I placed the order for full sized Euro brackets and covers (front and and back) through Philip at Lakin plates today. I know its been said time again, but Philip is fantastic to deal with, very helpful and he gave me the VWW 5% discount . He said he'll get the goods to Barloword by Wednesday also which is perfect considering such short notice.

I think I'll ask Barloworld to install the brackets myself before driving off on the day of pickup, Philip suggested I either watch them put the plates on or do it myself there as you never know what sort of care the guy installing them will take.

I'll post some photos up on Wednesday/Thursday.

Sure did.

If the full size vic euro plates have pre-drilled holes, like the standard vic slimline plates do, you could get them to just screw the front plate on to the plastic holder. Then you could install the lakin front bracket when you get home.

[MiiLos]

Nope the Euros don't come with pre-drilled holes!