Xenon upgrade help

[AUC-05L]

Hi all.

As my headlights are very faded I decided to upgrade to xenon.

I bought R32 xenon housings, Ballasts, igniters, d2s bulbs and the kufatec harness adaptors put it all together and only the highbeams work. No parkers. Indicators or xenon beams. Is there something I'm missing.

From my research I was led to believe it should be plug and play with the adaptor harness.

Any help would be greatly appreciated.

Cheers.

Sent from my Nexus 5X using Tapatalk

[kamold]

You need to code your CECM for the new setup

Sent from my HTC 10 using Tapatalk

[AUC-05L]

Thanks mate. Didn't think it needed programming unless I wanted to turn the shutter on.

do you kniw of any instructions for the coding available online?

Sent from my Nexus 5X using Tapatalk

[kamold]

Try and find a coding string for the cecm from a car factory fitted with xenons and go from there (preferably a RHD model)

Sent from my HTC 10 using Tapatalk

[arcadelt]

...and also get the washers and levellers to fit to the rear suspension.

[AUC-05L]

not doing washers and levelers at this stage. maybe once I actually get them working.

Looks like I will have to get into vdcs and enable xenon on the cambus and body control module.

Sent from my Nexus 5X using Tapatalk

[JustCruisn]

...and also get the washers and levellers to fit to the rear suspension.

x 2, it is not working until you have all this too.
The levers are actually driven from both front and rear suspension arms.
Coding may not be possible without a new CCM


Have you considered buying a Lancer and putting in some 8000k HIDS ?