Above Forum Ad

Collapse

Announcement

Collapse
1 of 2 < >

Email Notifications Failing (mostly Telstra)

Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2 < >

Welcome to the new look VWWatercooled

After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.

Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.

The new forum software is an upgraded version of what came before, it's mostly the same but also a little different. Hopefully easier to use and more stable than before. We are learning together here, so please be patient. If you have questions, please post them here. If you have worked something out and can provide an answer,
See more
See less

help - fitting of rubber seals on windscreen edges

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • help - fitting of rubber seals on windscreen edges

    hi all

    If you get a chance, could you guys please take a look at your own GTIs (or any GOLF V for that matter), and please let me know how the outside rubber seals on the left and right ends of the windscreen sit?

    as marked by the arrow on this photo



    Do the rubber strips rest at the edge of the glass (like the section above the arrow), or are they resting ON the glass (like the section below the arrow)?

    I'm trying to see if mine are correctly installed (in my quest to reduce wind noise). They were resting on the edge of the glass, but I felt that they were too soft in that position, and was wondering whether airflow might deform them...causing wind noise!


    please let me know

    thank you

    Satz

  • #2
    Easy way to check to see where wind noise is coming from is to use some 100mph tape* and tape over different sections until the windnoise stops. Doesn't take long and instead of guessing you can identify the area where the noise is coming from.

    *aka duct tape, cloth tape etc......
    website: www.my-gti.com

    Comment


    • #3
      it's a funny noise... not typical wind hiss that you get from door seal leaks, but a general 'roar' that seems to emanate from across the windscreen from exactly 100kmh...

      For now just want to check that the rubber seals are correctly in position...just wish I had another GTI nearby to compare with

      Comment


      • #4
        There should be part of the rubber beside the window and part in front.

        The best way to describe this is that it looks like an "L" with the top of the "L" in between the glass and panel ... and the "_" of the "L" about 2cm from the glass.

        Hope this makes sense...
        2007 GTI (MY0 - 5dr, Silver, DSG, Leather, Sat Nav, Euro plates

        Comment


        • #5
          i went around looking at all the used Golf V in my dealer, and the majority (but not all) did have the rubber resting next to the edge of the windscreen, not on the front of the windscreen glass.

          However one of them had part of the rubber resting next to, and part on the front of the glass!

          I'm trying mine on the front to see if it makes any diff to the wind noise...doesn't seem to make it worse at least!


          cheers

          Comment


          • #6
            Top pic is how my R32 came in 2008. Under the glass.

            Bazzle
            Prev 2008 R32 3 door DSG.
            Prev 2010 S3 Sportback Stronic.
            Now Lexus IS350 F Sport

            Comment


            • #7
              thanks bazzle

              btw, did your car come standard with auto-rain-closing, or is it something you could program in later?

              cheers


              satz

              Comment


              • #8
                I programmed it in using the Inst from Mavericks site and from the MKV site.

                Baz
                Prev 2008 R32 3 door DSG.
                Prev 2010 S3 Sportback Stronic.
                Now Lexus IS350 F Sport

                Comment

                Working...
                X