Need pinout for DSG shifter connector

[sebas_thefish]

Does anyone have the pinout for this plug which goes to the DSG shifter surround? 2007 Mk5

Sent from my Samsung Smart Fridge

[kamold]

Check your email mate

[sebas_thefish]

Thanks for that. What I'm actually trying to determine is where 'L101 - Selector lever display illumination bulb' receives power from and which pin/s on that connector are for power. Having a look over the diagrams I can't seem to trace it back to anything.

[kamold]

Looks like it's at T10v/8 (grey/blue). This just connects the LED in the selector display panel Y6 to the J587 selector control unit underneath it.

[sebas_thefish]

So I assume the selector mechanism receives power from the CECM then?

[kamold]

Yes it's powered from the CECM at T10s/6 (under selector lever cover) which is a grey 0.35mm cable that ultimately connects to the CECM at B12 grey 0.75mm (via B340 in main wiring harness)

[sebas_thefish]

Yes it's powered from the CECM at T10s/6 (under selector lever cover) which is a grey 0.35mm cable that ultimately connects to the CECM at B12 grey 0.75mm (via B340 in main wiring harness)

Excellent thank you! The reason I ask is because the gear indicator lights on the DSG knob surround aren't lighting up anymore and I'm trying to firstly determine how they're powered.

I'm guessing it's an internal fault however somewhere within the selector mechanism and it's going to have to be replaced to fix it. All my other interior lights work fine and no errors in VCDS, can't see what else it could be.