G-8VXWWTRHPN Wireless Rear Camera - VWWatercooled Australia

Announcement

Collapse
1 of 2 < >

Email Notifications Failing (mostly Telstra)

Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
2 of 2 < >

Welcome to the new look VWWatercooled

After much work and little sleep there is a new version of the forums running on more powerful and recent hardware as well as an upgraded software platform.

Things are mostly the same, but some things are a little different. We will be learning together, so please post questions (and answers if you've worked things out) in the help thread.

The new forum software is an upgraded version of what came before, it's mostly the same but also a little different. Hopefully easier to use and more stable than before. We are learning together here, so please be patient. If you have questions, please post them here. If you have worked something out and can provide an answer,
See more
See less

Wireless Rear Camera

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wireless Rear Camera

    I got a wireless rear camera for my mk5 Golf.

    I will figure out mounting it and running through rear bumper ok....BUT I am not sure what wire to draw the power from.

    The reverse light bulb in the doesn't seem to have the wire colour in the diagram so tracking it coming up is hard.
    There should be a brown neutral and a black/blue power wire for the reverse but I can't seem to locate it.

    Anyone have any ideas ?

    Also any tips on repairing the washer fluid line going to the back incase someone cut it thinking wire were inside - asking for a friend
    Last edited by gstsaver; 29-05-2019, 10:41 PM. Reason: additional

  • #2
    You’ll need to pull back the boot trimming on the left hand side of the vehicle. You’ll find a bunch of nested cables

    Comment


    • #3
      it should be a white wire from the lamp housing to pin 3 of a 5 pin connector and then the wire out of the connector should be black and blue.

      good luck.

      Just from experience mounting a reverse camera in my wifes amarok - try and get it as high as you can or you end up with no perspective of distance.

      Comment


      • #4
        Originally posted by gstsaver View Post

        Also any tips on repairing the washer fluid line going to the back incase someone cut it thinking wire were inside - asking for a friend
        I just cant picture the diameter of the pipe but could try those sharkbite style push fit hose fittings something like these 5mm Tubing Union Tee, 5mm Push in Fittings, 5mm Air Fittings - but just a 2 way joiner. or jam each side into a slightly larger diameter pipe - might need to heat the new section up to allow it to stretch a bit to really jam the cut pipes in - dont let your "friend" near your car with tools again

        Comment

        Working...
        X