-
So for my 1.6 all i need is the parts mentioned in the first page? Ive got a key fob from a donor gti i can try and use. -
SUCCESS!: How to make a new key incl. transponder
There's a little confusion there, mostly just with the names.
Firstly, there's 2 separate parts that need coding in each flip key remote, both with a separate process/system. One is for the immobiliser (transponder chip), and the other is for locking/unlocking the doors remotely (remote transmitter).
The bit mentioned that was re-soldered is actually the 'transmitter' for the remote lock/unlock system, and will need to be programmed in with a VCDS if the above quick method doesn't work (or you can't make it work without 2 keys, etc.). It's good to do it with this VCDS method as you can 'erase' any other old remote pairings, and have yours as the only remote that can unlock your car. There is also a max number of paired remotes, which sometimes causes issues programming a new remote from too many old remotes programmed to the car, and erasing/clearing fixes that issue too.
The other bit, that is actually the transponder chip, is actually the tiny glass capsule that's glued inside the casing of the remote transmitter, and interacts with a radio frequency ring around the key barrel, and like mentioned, if it starts the car, and no other keys are near the key barrel, that is already paired and working fine... This is the same for standard and remote keys.Last edited by kendog; 13-11-2013, 12:27 AM.Leave a comment:
-
You only need software to pair to the immobiliser - which is already done if you can start the car. there is a simple procedure for pairing the remote transponder - have a google, sorry I can't help more but I'm on my phone.Leave a comment:
-
Can anyone confirm which VAGCOM to buy ? I'm guessing that's the same one that everyone uses to check engine codes etc ?
I ask because I finally opened up the key that came with my car to see why it isn't working and discovered that the buttons on the transponder mainboard were broken off. I've now resoldered them back on.
It seems the transponder has not worked for the previous owner due to this.
Am I right in assuming I will need to go through this process to get the keyless entry system to work again? (getting sick of having to open my car like it is pov pack).Leave a comment:
-
Hi guys, I'm having trouble retrieving my skc pin code for my MK4 Golf. I keep getting access denied when I log in. Does anyone know why or how I can get my pin code so I can duplicate my key?
I'm using vag tacho 3.01 like in this tutorial. Can't seem to get it to work.. any help would be much appreciated, thanks
Here is a log of what happens.
Code:Connecting VDO New... OK 1J0920805B KOMBI+WEGFAHRS. BOO V01 Check for VDO tacho... Wrong Tacho Selected !!! Disconnect and Select another Type! Reading Unit Info... Ident.-Nr. WEGFAHRS.:VWZ6Z0Y2126919 Reading Unit Info... 1J0920805B KOMBI+WEGFAHRS. BOO V01 Connecting Motometer B00/MM0... OK 1J0920805B KOMBI+WEGFAHRS. BOO V01 Check for MotoMeter tacho... Tacho is MotoMeter! SW:52 Try to log in... Please wait! Message Lost Error! !!! Access DENIED !!!
Leave a comment:
-
Sweet! Thanks!
My next mod here is installing a different CCM so I can then install/program some factory remotes! Which was not previously possible on my model. I'll keep you guys posted!Leave a comment:
-
That's the one and it says its down at the moment on the next page after you open the one with warnings. Its working now I just logged in Says the certificate is OK when I check itOriginally posted by kenbot View PostThat was a bit cheeky mate, I'm not that lazy. But when I do just use the google link/s, it comes up with a few warnings, and makes you feel like you might be going to a dodgy site, and warns it's not secure!
And when money, credit cards, and overseas websites are involved, combined with warnings, it's nice to get a specific link from someone who has actually been using the site with no problems, for peace of mind..
, I'd love it if you could confirm this is the site you've been using, it could save me and others being ripped off!
https://erwin.volkswagen.com/erwin/s...B7EC9.ASTPVWE1
Massive thanks in advance mate!
Last edited by Guest001; 09-09-2013, 01:23 PM.Leave a comment:
-
That was a bit cheeky mate, I'm not that lazy. But when I do just use the google link/s, it comes up with a few warnings, and makes you feel like you might be going to a dodgy site, and warns it's not secure!Originally posted by Hillbilly View Post
And when money, credit cards, and overseas websites are involved, combined with warnings, it's nice to get a specific link from someone who has actually been using the site with no problems, for peace of mind..
, I'd love it if you could confirm this is the site you've been using, it could save me and others being ripped off!
https://erwin.volkswagen.com/erwin/s...B7EC9.ASTPVWE1
Massive thanks in advance mate!
Leave a comment:
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages, select the forum that you want to visit from the selection below.
Your Supporter or Sponsor Subscriptions will expire soon.
We hope you will choose to stay with us!
This means you should apply for your renewal now to avoid
any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Leave a comment: