Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

Fitment of Yarrowsport Rear stress brace to a Bora

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    the bora may be stiffer in the rear, but don't forget if it's 4 motion, it will have more stresses in the rear when accelerating.
    so basically the r32 would likely benefit the most

    Comment


    • #17
      so you're saying it will help the bora (due to 4mo so stiffened rear), but will help the r32 more (hatch and 4mo)?
      MY02 Bora V6 4Mo|Matte Black plastidip|VTDA|R32 Exhaust|R32 dampers and springs|TT pedals|R32 steering wheel|17" 8L S3 rims|R32 sways|Blue Haldex|EBC reds

      Comment


      • #18
        yeah sorry wasn't too clear with what i said. yeah that's pretty much what i was saying. will help the bora 4mo, but will help the r32 the most. all other golfs probably somewhere in between.

        Comment


        • #19
          Only pics I could find atm




          Project Hairdresser car DIY build has begun...
          '96 Mirage Track car: BC RM Coilovers, 294mm Galant VR4 Brakes, 5 stud conversion, 16x8 Forged Rays MS01S, UR 23mm sway bar, UR Strut Braces, Evo 5 Recaros, MR Lancer electrics interior conversion, Engine + Exhaust in the works

          Comment


          • #20
            yeah, have seen that one (linked via vortex right?) and there's no way i am putting slices and masking tape on my ride like that - she is far too ghetto as it is with bad paint, dodgy rims, and a Modshack intake
            MY02 Bora V6 4Mo|Matte Black plastidip|VTDA|R32 Exhaust|R32 dampers and springs|TT pedals|R32 steering wheel|17" 8L S3 rims|R32 sways|Blue Haldex|EBC reds

            Comment

            Working...
            X