Tweet
Re: The Vento
Why Monday? How long does it take to get tyres fitted? Lol
Why Monday? How long does it take to get tyres fitted? Lol
Email Notifications Failing (mostly Telstra)
Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
See more
See less
-
'95 Golf 3dr... low. slow. loud. -
Im away this weekend, just dropped them off and said he can do it whenever its best.Comment
-
Ah so it was your choice to not have them til Monday. I wanna see em fitted!!'95 Golf 3dr... low. slow. loud.Comment
-
i forgot to mention before,
after i lowered the car it now has a loud knocking/shudder when turn right, i dont think its the bearings but more to do with the suspension or drive shaft or something along those lines.
is there something i should check when i get my new wheels and figure out how the f*ck im going to jack the car up lolComment
-
Comment
-
What are your camber settings like? There are a few possiblities - most relate to the car being very low!
oh, and try jacking the front cross memmber up first, this should give you enough height to get a jack under the sill/subframe.Comment
-
fitted the wheels up this afternoon, the fitment is spot on. could not be happier with the way it looks...
the problem is im rubbing a tad on my brakes, i think what ill do is just grind a touch off them and it should be sweet. i rolled the passenger rear guard and strangely enough the drivers side had already been done??
im yet to touch the front, ill have a go at that as well tomorrow.
oh and my front camber is as far negative as it goes
pictures (are heaps **** because of sunlight and phone quality):
Comment
-
The Vento
The rear needs a little camber and it'd look the tits.Comment
-
looks awesome man, nice work.
Yer i agree more camber on the rearSomething newComment
-
The Vento
I started rolling the rear in preparation for the enkeis I was going to put on and then ran out of daylight that day and never got around to doing the others haha. That's why one was already done. Your welcome!
Comment
-
The Vento
Looks awesome by the way, looks like the wheels fit great!Comment
-
Re: The Vento
Soooo good for eBay cheapies!!!! Plastidip them a different colour every few months :p'95 Golf 3dr... low. slow. loud.Comment
-
Comment
-
They look so awesome dude haha!1976 VW Golf "Swallowtail" - Rallye Red (long term resto)
2009 Pirelli GTI - Stg3 killer
2009 R36 Passat - Daily baller
Originally posted by Peter JonesComment
-
What I suspect to be the problem is that the end of driveshaft is rubbing on the gearbox flange. This is due to the play in the CV's (that allows the DS to move 'sideways') and the extreme lows combined with the max neg camber has the effect to push the DS in. (it's fixed at the wheel end, essentially)
Solution: well to prove the theory correct, raise the car and or pull out the camber. If this fixes it, then it's probably as described above. Permament solution is to mill down the end of the DS (by about 5 mm, also push the CV 5mm back, and the circlip groove as well) and then run as low and cambered as it.
How low is the car? Front of the sills/pinch welds and subframe?Comment
Comment