Need pics of how you mounted your pod :)

[Soundofav6]

Hey guys not sure if ur interested but Rev Race gear sell a heat sheild metirial which is awsome.
I built a shield for my polo out of the stuff. About $90 for a sheet but its heat relfection qualitie is huge so keeps the pod nice and cold.

COOL mate where are they located? You got a pic?

[PoloGTi]

I am in tassie hers a pic a bit hard to see sorry.

Just made one out of cardbored then trnasfered it on the sheet and riveted it together and then used some door rubber stuff to run along the edges.

[Soundofav6]

Sweet.
How did you cut the metal... I was in local bunnings, the aluminium is ok but I have no tools to cut it + mk3 is harder as it needs to cut into shape of side wheel. I gave up.

[PoloGTi]

I used a pair of tin snips not very expensive really and ull have it for life this stuff is a samwich so two very thin bits of metal with some sort of filling. Easy to cut.

[The_Hawk]

I was thinking about just using a sheet of aluminium I have here to fabricate a shield, maybe line it with something too... we will see what happens when I get the energy to do anything.

In short free materials I already have here is good, and something, even just a sheet of aluminium will work better than nothing

[The_Hawk]

Got a new pod today, something to tide me over till I get the CAI bits and pieces and put that together. Sounds a little different to the old one, maybe a little louder, but then I don't see how.

Ground off the old mounting holes for the old air filter and have just used the metal ring as somewhere for the filter to sit. Next weekend I might shape the aluminium I have into a heat shield of some sort, might also add a little bit of rubber to the mounting ring so the filter isn't simply resting on the metal.