Tweet
Haha...spotted that one this morning.....nuts 
-
-
working on some camber plates, cut to 3 degrees will weld them up tommorow, and unlike alot of camber plates/adjusters these will let the bolt remain straight and not put any extra tension on them
Originally posted by Preen59Comment
-
very nice
but will the out side of tyre even touch the ground
big fat tyres and big fat arches and lots of camber
will look great!!!!!
Comment
-
I'll be interested to see how those plates turn out, as I've wondered alot about these things...Comment
-
Originally posted by Preen59Comment
-
did you know what camber it had before
mine has 1.5 deg
if yours was similar , could be i bit much ?
but i could have bent stubs or thirty years of sag !!!!Comment
-
That's gonna look awesome with the phat rears
Bear in mind, it won't drive very well with that much camber, though!!
P.S. Stock rear is -1 degree. I tried -2.5 with the Eurospec spacers and it was terrible. Apparently 1.5-2deg is good for a track car
Last edited by Valver.; 11-02-2008, 07:20 AM.
1976 Project Carbon Mk1 - Sold! | 2015 Lotus Exige Cup | F80 M3 Family WheelsComment
-
hehe who cares. LOOK AT IT!!! THOSE FATTIES ARE GONNA BE TUCKED UP TOP
nice weld BTW.....
wabitComment
-
I would, as Mk1s are better to drive than look at, but it's not my car, and yes it'll look hot (Mike McCoy style!!)Originally posted by WABIT View Posthehe who cares. LOOK AT IT!!! THOSE FATTIES ARE GONNA BE TUCKED UP TOP
nice weld BTW.....
wabit
1976 Project Carbon Mk1 - Sold! | 2015 Lotus Exige Cup | F80 M3 Family WheelsComment
-
mike runs seven degrees???
Originally posted by Preen59Comment
-
He also can't run the car for much longer than 20 minutes I have no gripes, though; it's one of my fave cars for style and full respect for building it to suit himself and no one else
1976 Project Carbon Mk1 - Sold! | 2015 Lotus Exige Cup | F80 M3 Family WheelsComment
-
Sorry for my ignorance, and going off topic, but who is this McCoy fellow and are there any pics of his highly admired Mk1?Originally posted by Valver. View PostHe also can't run the car for much longer than 20 minutes I have no gripes, though; it's one of my fave cars for style and full respect for building it to suit himself and no one else
Just curious, and sorry if I have caused any offence.
JP
Opps, sorry, just saw the 'inspired' thread. Amazing effort in the car.Last edited by JP-009; 12-02-2008, 07:21 AM.2010 Tiguan 125TSI
2004 Polo Match
1976 White MkI Golf
sigpicComment
-
Would you consider having some more of these camber plates made up?
I would be interested in a pair2.0L 16v Audi 80 - Project
3.0L 30v Audi A6 quattro - DailyComment
-
i basically made them myself,just had the degree machined.yer i may be interested.have made a few set of stub axle spacers for people
Originally posted by Preen59Comment
-
Originally posted by JP_Aircooled_TDi View Post
mike mccoy has a mk2 jetta id be suprised if you dont know this car
first pic is his car
wabitComment
Comment