BBS RS or RM help!!!

[WABIT]

i would like to know what size the BBS centercap IN the center bolt is... both outer diameter and inner where it clups onto the center hex.. and may i have pictures if you got any

its really urgent!!!!!!!!!!!!!



thank you
wabit

[velly_16v_cab]

i think its 52mm....im sure you find out off the net

[WABIT]

i got told 70mm??
aaaarrrrgggghh

does anyone have a set of RS or RM's that can check for me please???


wabit

[rayray086]

I bought a set of centrecaps from Team Racing Hofmann (eBay shop). Let me take down the measurements now.

Just a plug: I don't have these wheels anymore and I've still got a set of these centrecaps. They're black with gold lettering, genuine BBS items. I have all 4 and they haven't been fitted! Interested?

[velly_16v_cab]

i have a set of RM...but they are in the uk lol

[WABIT]

I bought a set of centrecaps from Team Racing Hofmann (eBay shop). Let me take down the measurements now.

Just a plug: I don't have these wheels anymore and I've still got a set of these centrecaps. They're black with gold lettering, genuine BBS items. I have all 4 and they haven't been fitted! Interested?

PM sent

wabit

[velly_16v_cab]

70mm...see

http://cgi.ebay.com/ebaymotors/BBS-Center-Caps-Set-of-4-NEW-VW-Audi-Porsche-BMW_W0QQcmdZViewItemQQcategoryZ43961QQihZ016QQitemZ260200332992QQrdZ1QQsspagenameZWDVW

[WABIT]

This is a set of four factory center caps for BBS RE, RC, RE style wheels.

wabit

[rayray086]

Yeah those won't fit the RS.



A = 70mm
B = ~57mm

Notice the three prongs around the 57mm diameter circle. These are the only ones that fit RS. RM I'm not sure, I think they use a different mechanism. Hang on let me find the huge BBS thread on Vortex.

Edit: pages worth of information, pics, and Vortex bull**** on BBS RS. http://forums.vwvortex.com/zerothread?id=1022742

Oh, and found another useful site - http://www.purems.com/products/produ...=10&II=77&_cid - you want the ones under style B

[WABIT]

these are the wheels im getting but in gold centers

this is that the center bolts will look like... i wanna er BBS caps for them

http://forums.vwvortex.com/zerothread?id=3591276

wabit

[rayray086]

Yeah the centre hex nut looks similar to the BBS RS one... though sizing is crucial here.

[TassieGTi]

I know you're probably excited and want to order as much as you can for the Cabrio rebuild, but my advice would be to have a bit of patience and wait until the wheels arrive before looking into centre caps. Then you can take a few measurements from your wheels and go from there

I've got some BBS RS and they use a 70mm centre cap as pictured below:






The diameter of the hole in the hex nut for the badge is 52mm. Check your wheels when they arrive

[WABIT]

thank you very much mate

wabit

[WABIT]

"there the 70mm real bbs caps cut the tabs off and drmemeled out the remember hex till it fit, and glued them in"

found out what i have to do to make them fit off a fellow vortexer

wabit