I have T2 2008, 3.0 TDI, with RNS510 retrofitted recently, (upgraded from OEM Delta).
I have a problem with FM perception, very poor and inferior to the Delta it replaced, unit shows only one antenna being accessed by the head unit.
I can see the antennas in service menu like A1/ON A2/OFF, swapping the connectors on the head unit results in A1/OFF A2/ON with no change to reception quality.
My T2 is CANBUS2 and has the red MFD, I have full functionality with navigation (route directionds appear in mfd), bluetooth works fine as well, checked with a couple of fellow owners with the same model and both of them tell me they see both A1 and A2 ON and reception is good.
So ............., there must be something still needing to be done to enable both antennas to be seen by the RNS510 and enabling the switching to be done.
Any advice, this thing is driving me nuts!
Thanks a lot.
I have a problem with FM perception, very poor and inferior to the Delta it replaced, unit shows only one antenna being accessed by the head unit.
I can see the antennas in service menu like A1/ON A2/OFF, swapping the connectors on the head unit results in A1/OFF A2/ON with no change to reception quality.
My T2 is CANBUS2 and has the red MFD, I have full functionality with navigation (route directionds appear in mfd), bluetooth works fine as well, checked with a couple of fellow owners with the same model and both of them tell me they see both A1 and A2 ON and reception is good.
So ............., there must be something still needing to be done to enable both antennas to be seen by the RNS510 and enabling the switching to be done.
Any advice, this thing is driving me nuts!
Thanks a lot.
Comment