Has anybody sound deadened more than just the two front doors when getting their speakers upgraded? I'm wondering whether road noise in my Golf V1 is emanating from the wheel arches (I'm running Hankook Ventus Prime2) or from the fire wall?
Above Forum Ad
Collapse
Announcement
Collapse
No announcement yet.
Aftermarket stereo options ?
Collapse
X
-
Originally posted by walbjj View Postu dont have to go overboard. i spent $1k total on all my stuff incl install. u can see by my sig that i used quality components. in ur case, u dont have to get oem. u can get any aftermarket HU as u dont ahve to deal with the loss of mfd like i would with the mk6.
u can get a bt pioneer hu for about $300, and good speakers and an amp, and ur off.
If it's just a lack of scrolling through the phone book on the MFD, I'll live, much like the lack of sat nav directions on the MFD.
Thanks for the advice. I'll keep an eye out for your GTI around the traps.
---------- Post added at 10:06 AM ---------- Previous post was at 09:59 AM ----------
Originally posted by Gumpf View PostI just got an Alpine INA 900 installed during the week. Paid $1300 for the unit which I'm very happy with compared to the cost of an RNS 510.
It looks sweet as and comes with BT and USB connection. After install I'd say I'm at least $2k better off.
Comment
-
OK. So Iv'e got my unit and I can say it's not that bad at first glance.
Can anyone give me some links or advice for removing the old rcd310 and installing the new unit? Mainly the bit where I remove the fascia from the old stereo.
Thanks.
Comment
-
Lever and pull... work the surround from the edge then gently pull it out. There is a few steel clips on the back holding onto some plastic piece in the dash. I wouldnt worry about breaking the behind bit, just worry about the fascia itself and it should be all good.
Where abouts in Sydney are you located?Last edited by The_Hawk; 22-03-2012, 06:04 AM.
Comment
-
I'm just off the bridge at Neutral Bay.
Thanks for the advice. I ended up doing the install in the dark last night. Easy as.
So far I'm pretty happy.
I'm just about to start playing with the functions, so a write up will be soon to follow.
Ps. The mfd displays audio details.
Comment
2025 - Below Forum
Collapse
Comment