Video in Motion

[IN2VWS]

Not sure if it has been discussed here before....but here it is again if it has

I just activated the video in motion on my RNS510. It is an easy mod, and works a treat (not for me...its for the passengers).
Here is the link:
Video In Motion for US RNS-510 - TDIClub Forums

The buttons they tell you to hold down were different to mine. I held down the eject, star and setup buttons.

[guthrie]

I can confirm also that this works. I burnt the "berto" file to a CD, inserted it into the RNS ... A few minutes later I have video in motion.

Glad I didn't spend $100+ for an electronic module to do this.

[GraveDilute]

Unfortunately it didn't work for me.
Maybe I have a different firmware or it's not compatible with the LED version of the RNS?

[GraveDilute]

This file works for me

https://rapidshare.com/files/3679142426/mycd.rar

[Idle]

This file works for me

https://rapidshare.com/files/3679142426/mycd.rar

Rapidshare reports that the file has been removed.

[GraveDilute]

OK, I've uploaded the same file.
This worked for me

Download mycd iso, fast and secure downloading from easy-share.com

[hoddy]

I have also had success with the Berto VIM file. (the myCDiso did not work).
2010 Transporter
Burnt disc at 24x using Imgburn (nero didn't work properly)

Please note: when I inserted the disk it came up with CD error but it did not eject. Don't push the OK button and it will then restart and detect the CD and start the process.

[ithinkimightbe]

Just used the Berto ISO image in my 2010 GTI and it worked flawlessly.

Took ten minutes in total including burning the ISO. Only problem encountered was a 'clamp issue' when inserting the CD which involved changing the time format to 24-hour time. The CD wouldn't work with the keys in the ignition, but installed perfectly without.

Thanks for the tip!

[Ryan_R]

Will give this a go and report back, thanks.


[+] Updated software, all works fine.

[l3lazin]

LEGEND!!

Works on mine as well. Had the clamp issue and fixed it by changing the time setting and not having the keys in the ignition as 'ithinkimightbe' advised.

[aussietig]

LEGEND!!

Works on mine as well. Had the clamp issue and fixed it by changing the time setting and not having the keys in the ignition as 'ithinkimightbe' advised.

Clamp issue is actually ID10T fault code the unit throws up!

Only appears if keys are in!

With all RNS510 FW or SW installs, make sure there's no keys inserted!

Just turn the unit on manually!

[mycl]

Fan-friggin-tastic! That mycd.iso works a gem in my GTI mk6 from Mar 10...! No key in ignition, do a reboot with < and > and * held, and wait for it to do its thing then presto!

[R36 DSG]

How did I not see this sooner, worked first go in an 08 R36. Followed same procedure as mycl above.

Thank you!

[l3lazin]

Clamp issue is actually ID10T fault code

lol True, the procedure is duly noted for the future...

[team_v]

OK, I've uploaded the same file.
This worked for me

Download mycd iso, fast and secure downloading from easy-share.com

Apparently this one is not available any more, says it has been removed?
Can you please re-host it?