HELP: Does anyone know the Pin Assignment for the Side Assist Radars?

[dArK5HaD0w]

Specifically 5Q0907685/5Q0907686?
also known as the "Blindspot Radars".

I need to tap into the CANBUS High and CANBUS Low pins, so i can connect a TPMS (direct) controller module that i'm looking to retrofit.

any help would b much appreciated.

[kamold]

On the main unit (right side) CAN high is pin 3 (orange/grey) and pin 4 is CAN low (orange/brown) for extended CAN interface.
Pins 6 and 7 are the private CAN connection between the 2 radar modules.

[dArK5HaD0w]

On the main unit (right side) CAN high is pin 3 (orange/grey) and pin 4 is CAN low (orange/brown) for extended CAN interface.
Pins 6 and 7 are the private CAN connection between the 2 radar modules.

all sorted thank u
yup, as u've mentioned, I got the same info from the Ross-tech forums. i tapped into pins 3 & 4 at the master (right side) radar.

the retrofit is all complete, and fully working.