Above Forum Ad

Collapse

Announcement

Collapse
No announcement yet.

fifth injector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fifth injector

    i was on the web and found a thread in reference to installing a fifth injector, it was positioned before the throttle body butterfly it would require a hole drilled enough for the injector rubber gromit to bed into, an injector a conector plug and section of the loom has anyone seen or done this?

  • #2
    wouldn`t that be a 7th injector for you mate? You could prob set that up with the microtech on your car
    sigpic Camden GTI Performance. VW / AUDI Specialists
    All Mechanical Work, Log book Servicing, New and used Parts and Imports
    19-20/6 Badgally Road, Campbelltown, 2560
    02 4627 3072 or 0423 051737 www.camdengti.com

    Comment


    • #3
      Originally posted by william
      i was on the web and found a thread in reference to installing a fifth injector, it was positioned before the throttle body butterfly it would require a hole drilled enough for the injector rubber gromit to bed into, an injector a conector plug and section of the loom has anyone seen or done this?
      I have heard of the existing cold start injector (K-jet) being incorporated to the super charging switch. So when you hit the switch the fith injector becomes active

      Comment


      • #4
        the thread was found on a peugeot 205gti forum in relation to a fifth injector setup on the throttle body pic attached would be good with a turbo setup on a four cylinder 2.0 golf engine with microtech

        Comment


        • #5
          I used the cold start injector on my MK1 to get more fuel. Using a box called a map fueller. Pretty crude but it worked a treat. Has a vac switch built in so it only injected when under load.

          The box could drive 2 injectors if required and you would drill them into the back of the inlet manifold, firing between 1 and 2, 3 and 4 for best distribution of the fuel.

          Reasonably easy to set up with a lambda reader to monitor the mixture. You could do it on the road easy enough. 6 or 7 settings based on revs, you could increase the duty cycle of the injector up to flat out to get the fuel you needed.

          With a pressure switch you could use it with a turbo too.

          Gavin

          PS looking for a link now.

          LINK found


          optimumcode@gmail.com | https://www.vwwatercooled.com.au/for...i-;-79012.html | https://www.facebook.com/TTY-Euro-107982291992533

          Comment

          Working...
          X