If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
do you really think it will go that low?? i think with the bags you are getting maybe as low as coilovers it about all it will be, but guess easy to raise looking pimp u nut job on the tyres lol...
sigpic
White 95 vr6, colour coad, koni, neuspeed, 16 x 9, samco!
do you really think it will go that low?? i think with the bags you are getting maybe as low as coilovers it about all it will be, but guess easy to raise looking pimp u nut job on the tyres lol...
you can lay frame with a little bit of hope, and the right airbags, the bags i just got are actually modified shorter than standard bilsteins, they also have a shorter bag, id be lucky to get "this" height aired up, but aired out will be as low as it can go, the chassis legs are getting notched this weekend too so nothing will hopefully be stopping me
both these cars are on bag-over-coils, both of them have old technology and are slammed bigtime, they also dont have any chassis notches, a chassis notch can lower a car from 3/4 to over 1" on the front.......
you tell me what coils go this low ? none. also with the wheels i am using, both cars have 15" with 195/45 tyres, i have 17's with a 20mm smaller overall diamater compared to the guys in the pics... so add the 20mm plus the frame notch (another 20mm) ill be roughly 40mm lower than these guys
this is the whole plan, i didnt spend 4k+ on airride just so they sit like coilovers.... what ever it takes... im gonna do it....
oh ok we will see then i guess, i would say you will need a body drop to get really low, and what size lines are you running 1/8th?? will take 8-9 days to go up and down and what size compressor??? good build so far hope it holds up and wont shag anything else out with it that low....
sigpic
White 95 vr6, colour coad, koni, neuspeed, 16 x 9, samco!
ive got 2x 480c viair compressors, 1/2" dump lines, 3/8" air in lines, 5 gallon tank and full FBSS 8valve manual system with a 7 switch toggle controller
the whole plan of airride is to go up and down, i hate waiting for cars with airride to go down in a span of 30sec... for me, i want that **** dropped in like 1.5sec
as for the 3/8 fronts, they are still quick but also accurate enough to get my ride height even
thanks for the well wishes mate, hope ur car blows up then when it does ill fly to where you are and laugh my head off! hows that for being a smartass? you like that? guess not, so keep your bull**** comments to yourself and stay the **** out of my thread with negative comments like that
looking pimp u nut job on the tyres lol...
thanks DUB_12V 
Tweet
Comment