Clockspring replacement/coding help

[chetnik73]

Hi All

Recently my clockspring failed on my 2016 Skoda Superb 162tsi.

I sourced a replacement part 5Q0953569A

I've replaced the part and am trying to add back the long code (6410) via OBDEleven in module 16 but getting a 31 - Function not available error

I'm not sure if the software of the new part is the issue or I'm doing something wrong

Old scan

16 Steering Column

System description: Lenks.Modul
Software number: 3Q0953521BD
Software version: 0195
Hardware number: 5Q0953569A
Hardware version: 075
Serial number: 20150921501011
ODX name: EV_SMLSVALEOMQB
ODX version: 001015
Long coding: 6410

Trouble codes:
No trouble codes found

New scan

-------------------------------------------------------------
16 Steering Column

System description: Lenks.Modul
Software number: 3Q0953521
Software version: 0195
Hardware number: 5Q0953569A
Hardware version: 075
Serial number: 20160330500114
ODX name: EV_SMLSVALEOMQB
ODX version: 001015
Long coding: 0410

Trouble codes:
No trouble codes found

The new scan shows long coding of 0410 and i can't change to 6410 without the above error. This is the cruise control function via stalk that it is not allowing me to change. Software number is different.

Can anybody help me here?

[MIG]

Are the part numbers on the units the same? 3Q0953521, without the letters at the end, does not look to support cruise control.

Did you get the clockspring by itself or with the stalks?

[chetnik73]

Hi.

I bought the part by itself. I was only going by part number and that was a match. No places actually quite the software but yes that software number coincides with a stalk that doesn't have cruise control. Not sure if there is any way to upgrade the software. Part wasn't cheap either so don't want to buy another in the hope the software is ok