Decided to start a thread on this as the previous mentions in other places were getting messy....
Discovered on another forum an easy mod to free up the breathing on our cars.
Most tuners I spoke with agreed that the standard air box with a decent panel filter would easily flow enough air for a stage 2 tune.
The standard cold air intake on the car draws most of its air from the engine bay & has a further cold side which is blocked from factory
I removed the intake and cut out the bits as required




There is already a factory air feed from behind the bumper in place by both cut outs

I blocked off the hot air feed from the engine bay with some aluminum tape & also the resonator box inside the air box
I also removed the silly snow screen at the bottom - not really required here in Australia




Haven't had much of a chance to drive it tonight & still yet to buy a replacement hi-flow filter but the diverter valve can now be heard with the windows down.
Discovered on another forum an easy mod to free up the breathing on our cars.
Most tuners I spoke with agreed that the standard air box with a decent panel filter would easily flow enough air for a stage 2 tune.
The standard cold air intake on the car draws most of its air from the engine bay & has a further cold side which is blocked from factory
I removed the intake and cut out the bits as required
There is already a factory air feed from behind the bumper in place by both cut outs
I blocked off the hot air feed from the engine bay with some aluminum tape & also the resonator box inside the air box
I also removed the silly snow screen at the bottom - not really required here in Australia
Haven't had much of a chance to drive it tonight & still yet to buy a replacement hi-flow filter but the diverter valve can now be heard with the windows down.

Comment