Short shifter option

[Redgti16v]

Does anyone run a short shifter on there cupra. If so any recommendations. Gruvenparts seems to have a good one neuspeed also has one but not sure if its suitable. Any suggestions would be appreciated
Thanks

Sent from my SM-G900I using Tapatalk

[CPITUNING]

I have been looking for one of these too

[Water Boy]

Does anyone run a short shifter on there cupra. If so any recommendations. Gruvenparts seems to have a good one neuspeed also has one but not sure if its suitable. Any suggestions would be appreciated
Thanks

Any 02a short shifter from a Vr6/passat will work in a Cupra.

I have been looking for one of these too

At least 20 options. All 020 short shifters suit your 8v.

[Redgti16v]

I have decided on the Gruvenparts short shifter with the b&m shifter

http://cdn1.bigcommerce.com/n-ww20x/lyr7tp5r/products/82/images/271/305__20449.1398475013.1280.1280.jpg?c=2

B&M Manual Short Shifter, Precision Shifter, Audi, VW » B&M

Pretty sure they will work

Sent from my SM-G900I using Tapatalk

[Water Boy]

Says B&M is out of stock!

[Redgti16v]

Plenty of b&m on ebay also plenty of knock offs as well and to be honest they exactly the same. The only difference I noticed was a little blue paint and 150 bux lol

Sent from my SM-G900I using Tapatalk

[Water Boy]

Keen to see how ya go!

[Redgti16v]

Well I purchased the Gruvenparts short shifter and its on the way now. Also didnt go the b&m...I went the autobahn88 at $34. Im going to install the Gruvenparts short shifter first and then still in 2 minds about changing the actual shifter because read a few bad things. See how we go

Sent from my SM-G900I using Tapatalk

[abreut]

Another option if you really want to improve the shift quality is swap the shift tower on your 02A gearbox with a later model 02J one. They work differently but will fit straight in (be sure to get the retaining cap from underneath though, its shift tower specific). You will then have to use the mk4 02J shifter and cables, but believe me the combination is just so superior to the 02A setup. Just another option, and there are probably a lot more upgrade parts available for a mk4/02J setup if you want to go further.

[Redgti16v]

Thanks mate I will look into that

Sent from my SM-G900I using Tapatalk

[crazyazz]

I might give one of these cheap B&M clones a go I think Do you have the link to the $34 one?

[Redgti16v]

This came the other day. Quality seems to be good....Does not come with installation instructions but im sure you could download the b&m instructions. Still going to wait for gruvenparts short shifter before I install it tho

Sent from my SM-G900I using Tapatalk

[crazyazz]

So this MK4 shiftier will fit the 02A box without any modifications needed? Do you need to get a new shift knob also?

[Redgti16v]

Well im not 100% sure because I haven't installed it. My understanding is that if it fits the vr6 mk3 it will fit the cupra being the same gearbox. Correct me if I'm wrong

Sent from my SM-G900I using Tapatalk

[Redgti16v]

I would say a new gear knob would be needed as well. Not 100% sure just yet

Sent from my SM-G900I using Tapatalk