WA 1.8 k-jet distributor

[straight_fresh]

hey guys im chasing a dizzy from a 1.8 k-jet, or any that will work with my 1.8 digi as im converting it to carbs and need one that runs advance/retard off the vac system, lemme know what you got and how much you want, post code is 6149 for any one interstate willing to post
cheers,
tom

[Volksee77]

sorry mate I've only got the 16V and 1.6 carb dizzy's. On another note if you wanna sell all the injection gear hit me up.

[Preen59]

I've got one.. But it has been modified to take a different plug as I was going to go to a custom Bosch high-energy ignition on my 1.7 years ago (never finished it). Dizzy works, though.

[roccodingo]

So do you want points or electronic version, Vacuum advance or vacuum advance and retard ??

Luke, what K jet parts you wanting ?? currently have some NOS KR injection parts on order.

[straight_fresh]

i dunno, it was running digifant innjection and im converting it to bike carbs, i could just srtip down the loom and run my current dizzy but id prefer one that runs of vac, just to keep wiring to a minumum, some one on ed38 said get one of a 1.8 k-jet and plug it into vac for advance/retard so im just going with that... maybe one of you guys on here can give me a bit better info on what i need, im pretty mechanically minded and doing all this work myself but i get a bit lost with the technical nitty gritty of it all
thanks guys,
tom

PS- MY CARS A DIGIFANT 2, NOT A K-JET FOR ANY ONE CHASING FUEL INJECTION PARTS

[h100vw]

If you have the digifant ECU run that with the carbs??? Or did you want to recurve it too?

Gavin

[straight_fresh]

i could just srtip down the loom and run my current dizzy but id prefer one that runs of vac, just to keep wiring to a minumum,

If you have the digifant ECU run that with the carbs??? Or did you want to recurve it too?

Gavin

i dunno what you mean by re curve it but if a can spend a few dollars and get something to bolt on and work and look neat ill just do that

[h100vw]

Is there not a vac line to the ECU, it's been a while so I can't remember. If there is, it will have advance in there. No need for the mechanical dissy.

Recurve mean to change the advance curve of the dissy to better suit the needs of the engine. Change of bob weights etc to alter the advance curve.

Gavin

[ozgti]

I can get you a new one for about 190?