If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Won't clear the calipers I bet, I have a set of 15x6.5 ROH's from a celica and even with an ET of 38, they don't clear the fronts.
5mm spacers will almost certainly be in order to make these fit on the fronts...
Offset and width are irrelevant for caliper clearance. The distance between the hub face and the back of the spoke design is what you need to worry about.
To put it in perspective, a 17x7.5 wheel with say, 50 offset, can potentially have the same amount of caliper clearance as an identically sized wheel with an offset of 12. if the spoke design and the hub face are the same width apart on both wheels then they will clear or foul the brakes in exactly the same way as each other.
Mrk Detailing, premium automotive detailing. Paint correction/protection specialist. PM me
Comment