Tweet
Moving overseas before this financial year ends, would love to see all my stuff go to a good home before then.
All prices are negotiable, buyer pays postage.
-USED H&R lowering springs 45mm drop
part# 29333-2
$150
-USED Set of Koni FDS dampers, passenger front has hit a kerb and I thought it's bent but turned out quiet straight. However that damper definitely needs a rebuild because the valve must be damaged and causing the steering wheel to vibrate at high speed. So price stays the same because that side needs a rebuild.
part#2100-4041
$200
-USED Standard 9N3 Polo suspension set dampers and springs, normal working order before removal
$20
-USED Standard 9N3 Polo steering knuckle pair, removed for brake upgrade
$20
-USED Standard 9N3 Polo brakes front and rear, removed for brake upgrade. Include front and rear calipers, rear discs. Pads have plenty of meats left.
$20
-USED Standard 9N3 Polo front sway bar drop link, no noise before removal
$5
-USED Whiteline front sway bar drop link
part# KLC163
$100
-NEW Darkside Sachs SRE Performance Clutch Kit for 5 Speed 02J/02A/02R, with sintered paddle disc
Includes everything in the following link except the flywheel. This kit can hold 390lb/ft+ (530Nm+) of torque. Guys from darkside told me this kit fits pretty much all 1.8T 5 speed gearboxes
darkside website
$700
-NEW Gearbox rebuild kit for 02J/02A/02R
$130 , $100 if you take the above clutch kit as well
-USED Set of 4 genuine VW PD130/150 injectors
Fit all 4 cylinder 8 valve PD TDI engines
They need to be calibrated before fitting to the car
Sold as a set
part# 038 130 073 AL
Condition: Used, in working order
Reason for sale: there was no one can do the calibration locally so ended up buying a fully calibrated set instead
$350
-USED 100 cell cat no O2 sensor hole, 3" in and 3" out. Done ~45000 km and been on the car for less than 4 years. No cloggage inside cells, only a light coat of soot
$40
-USED 4 Pin MAP sensor extension lead
Made from plugs and crimps bought online, I used thicker(1.13 sqmm) wire so there won't be any resistance issue
It comes in handy when the sensor is too far away when using the pipe kits. Been on the car for a while without any fault codes, changed to hard pipe kit so no longer need this
Condition: Used, almost new
$10
All prices are negotiable, buyer pays postage.
-USED H&R lowering springs 45mm drop
part# 29333-2
$150
-USED Set of Koni FDS dampers, passenger front has hit a kerb and I thought it's bent but turned out quiet straight. However that damper definitely needs a rebuild because the valve must be damaged and causing the steering wheel to vibrate at high speed. So price stays the same because that side needs a rebuild.
part#2100-4041
$200
-USED Standard 9N3 Polo suspension set dampers and springs, normal working order before removal
$20
-USED Standard 9N3 Polo steering knuckle pair, removed for brake upgrade
$20
-USED Standard 9N3 Polo brakes front and rear, removed for brake upgrade. Include front and rear calipers, rear discs. Pads have plenty of meats left.
$20
-USED Standard 9N3 Polo front sway bar drop link, no noise before removal
$5
-USED Whiteline front sway bar drop link
part# KLC163
$100
-NEW Darkside Sachs SRE Performance Clutch Kit for 5 Speed 02J/02A/02R, with sintered paddle disc
Includes everything in the following link except the flywheel. This kit can hold 390lb/ft+ (530Nm+) of torque. Guys from darkside told me this kit fits pretty much all 1.8T 5 speed gearboxes
darkside website
$700
-NEW Gearbox rebuild kit for 02J/02A/02R
$130 , $100 if you take the above clutch kit as well
-USED Set of 4 genuine VW PD130/150 injectors
Fit all 4 cylinder 8 valve PD TDI engines
They need to be calibrated before fitting to the car
Sold as a set
part# 038 130 073 AL
Condition: Used, in working order
Reason for sale: there was no one can do the calibration locally so ended up buying a fully calibrated set instead
$350
-USED 100 cell cat no O2 sensor hole, 3" in and 3" out. Done ~45000 km and been on the car for less than 4 years. No cloggage inside cells, only a light coat of soot
$40
-USED 4 Pin MAP sensor extension lead
Made from plugs and crimps bought online, I used thicker(1.13 sqmm) wire so there won't be any resistance issue
It comes in handy when the sensor is too far away when using the pipe kits. Been on the car for a while without any fault codes, changed to hard pipe kit so no longer need this
Condition: Used, almost new
$10
Comment