Tweet
Polybushed Mk4 Dogbone Mount
Used for ~6 months from new. Only changed as I fitted a VF Engineering mount. This has the red diesel bush which is a bit more friendly than the super stiff yellow mount. A good improvement over OEM.
$70 (can post for $15)
Mk4 R32/TT/S3 Front Control Arms
A great upgrade for the base model Mk4s or if you want to change the bushes on your existing arms and reduce time off the road. Loads of aftermarket bush options for these. The bushes and ball joints are usable but you might as well replace them while they're off (one ball joint has a torn boot). Hard to get these over here now (I've tried). I only removed them to fit the USRT/IDF Tubular Arms.
$200 ono (can post if required)
Mk4 R32/TT/S3 Rear Control Arms
Useful if you want to correct camber issues from lowering. 2 are shorter than the others so you can fit a shorter or longer pair on the top or bottom (vice versa) to change the camber. No issues with the bushes on removal. I replaced them with Gurvenparts/Mad Max arms.
$60 for all 4
Mk4 R32/TT/S3 Tie Rods
I replaced these as part of a suspension overhaul but there was nothing wrong with them as such. No knocking or anything. All joints are free moving without play.
$50
S3 Side Mount Intercoolers
I removed these to fit an AH Fabs front mount. Nothing wrong with them, no leaks. Some slightly bent fins as shown in the pics.
$70
Used for ~6 months from new. Only changed as I fitted a VF Engineering mount. This has the red diesel bush which is a bit more friendly than the super stiff yellow mount. A good improvement over OEM.
$70 (can post for $15)
Mk4 R32/TT/S3 Front Control Arms
A great upgrade for the base model Mk4s or if you want to change the bushes on your existing arms and reduce time off the road. Loads of aftermarket bush options for these. The bushes and ball joints are usable but you might as well replace them while they're off (one ball joint has a torn boot). Hard to get these over here now (I've tried). I only removed them to fit the USRT/IDF Tubular Arms.
$200 ono (can post if required)
Mk4 R32/TT/S3 Rear Control Arms
Useful if you want to correct camber issues from lowering. 2 are shorter than the others so you can fit a shorter or longer pair on the top or bottom (vice versa) to change the camber. No issues with the bushes on removal. I replaced them with Gurvenparts/Mad Max arms.
$60 for all 4
Mk4 R32/TT/S3 Tie Rods
I replaced these as part of a suspension overhaul but there was nothing wrong with them as such. No knocking or anything. All joints are free moving without play.
$50
S3 Side Mount Intercoolers
I removed these to fit an AH Fabs front mount. Nothing wrong with them, no leaks. Some slightly bent fins as shown in the pics.
$70
| Sorting the Turbo Goodness! | BBS Lm's 18x8.5 | KW V2's | 4 pot Brembo's
HAHAHA
Comment