NSW H&R Lowering Springs 30-35mm

[pog]

Hi Everyone,

Just last week I received a brand new set of H&R Springs along with my Bilsteins Shocks for my VW Polo GTI. Due to the nature of my setup, I'm now opting for a different height adjustment as I believe 35mm will be too low for the profile tyre I wish to run. As a result, am looking at alternatives and my loss is your gain as you won't have to worry about international shipping costs.

It's brand new in the box and you will receive:
1 x H&R Springs - GTI Edition (30-35mm) - Part No: 29333-3

You can ask any questions you wish, and I shall have pictures up for you later in the week.

Price: $350.00 pickup or shipped.

Cheers
0420969100

[kangfu]

Sent you an SMS, cheers.

[dainese]

Pog, sent you a PM asking where you sourced the H&R's from.

Thanks

[RhysQ]

just out of curiosity, what is the profile you wish to run? and what are the wheels specs?

I had 35mm H&R's with a 40 profile tyre (not that profile should make any difference to how low your car is )..... and my wheels were 7.5 inches wide at the front with a 20+ offset, and the rears were 8 inches wide at the rear with a 25+ offset. no scrubbing, not even close.

[RhysQ]

Pog, sent you a PM asking where you sourced the H&R's from.

Thanks

check out orange tuning, i got mine from there, very cheap!

[dainese]

check out orange tuning, i got mine from there, very cheap!

thanks mate

[dainese]

check out orange tuning, i got mine from there, very cheap!

do you know anyone locally in Australia?

[noone]

Dave (forget his username) has imported these previously, not sure if he is still doing this as there is not much in it...

[pog]

just out of curiosity, what is the profile you wish to run? and what are the wheels specs?

I had 35mm H&R's with a 40 profile tyre (not that profile should make any difference to how low your car is )..... and my wheels were 7.5 inches wide at the front with a 20+ offset, and the rears were 8 inches wide at the rear with a 25+ offset. no scrubbing, not even close.

I wish to run a 45 profile.

Wheel specs are:
17 x 8" / +35 offset/ 5 x 100

35mm on a 40 profile is not a problem. I'm running a 45 profile due to track tyre availability. With a 215/40/17 there is hardly any and quite expensive.

[pog]

Dave (forget his username) has imported these previously, not sure if he is still doing this as there is not much in it...

Username: GtiDave

[RhysQ]

geez a 45 profile on 17's!!
a.) it'll look like a tractor. b.) you're speedo will be way off. c.) you're accellaration will be absolutely rubbish due to the increased rolling diameter. hope you have pleeeenty of power to help you out.

[pog]

geez a 45 profile on 17's!!
a.) it'll look like a tractor. b.) you're speedo will be way off. c.) you're accellaration will be absolutely rubbish due to the increased rolling diameter. hope you have pleeeenty of power to help you out.

a. Haha, come on!
b. Speedometer Difference: 3.538% too slow (or 3.5km/h)
c. A 45 profile isn't going to be night and day.

I'll let you know all know how it looks anyway.

[RhysQ]

ive seen how it looks, shocking! someone on here got their polo delivered from VW with option 17's and 45 profile tyres..... looked ridiculous. there are photos of it on here somewhere but i'll be damned if could find them, it was about 2.5 years ago.

[pog]

Well I'll prove you wrong! Haha.