NSW Audi TT 17x8.5 ET50 (5x112)

[rayray086]

Unfortunately, these have to go. Had originally planned to get these fitted up for the Nats but it won't be happening.







Here are the things that are bad with them:

Some very light fine scratches, I assume easily buffed out with a machine polisher.


Worst of the brake dust baked on.


Section of front rim dented in a little, paint flake.


Paint chip.


Paint flake.


I'm guessing they were caused by the tyre guy removing the tyres before I bought these They don't look like signs of gutter rash.

Centre-caps are perfect though.


They've been meticulously cleaned, Opti-sealed and wheel-waxed in anticipation for fitment.

I'm looking at offers around $500. Please no chatter in the thread, only interested replies.

Deposit taken

[Mrk_Mickey]

Holy crap dude, if you can hold off a few weeks I'd take them!

If you don't get any interest for a while I'll come holla.

[DubSteve]

Can anyone tell me what et50 is like on a VR?

[rayray086]

Steve, you'll need to run adapters on the VR6 anyway. I've got pictures in my camera but I cbf uploading at this moment, but I can tell you with the 15mm adapters at the front (ET35 17x8.5), it would have fouled my Hottuning spring collars if I had helper springs in. Helper springs out and low, they clear the suspension (195/40s would clear too, as I would imagine the stretch is huge). So ET50 on a VR6 would most definitely hit the coilover strut.

25mm adapters in the rear clears fine. A decent finger gap from the fuel collector pipe thing haha.

[DubSteve]

Steve, you'll need to run adapters on the VR6 anyway. I've got pictures in my camera but I cbf uploading at this moment, but I can tell you with the 15mm adapters at the front (ET35 17x8.5), it would have fouled my Hottuning spring collars if I had helper springs in. Helper springs out and low, they clear the suspension (195/40s would clear too, as I would imagine the stretch is huge). So ET50 on a VR6 would most definitely hit the coilover strut.

25mm adapters in the rear clears fine. A decent finger gap from the fuel collector pipe thing haha.

Hmm thanks Ray, I wonder poke wise what are the like?

[rayray086]

Flush as ****. I've had everything worked out

[rayray086]

Deposit taken