Transmission 02A repairer/rebuild in Melb ?

[aussieg60]

Does any body know of a good repairer/reco for an 02A trans in Melb ?

[Golf Loon]

Nope, but I have a few low kms 02a boxes

[Tim]

what sort of dollars would u want for a decent 02A?

[Golfwise]

02As

Be sure you get a VR6 one Tim as the housings are different to the 4cylinder ones.
Have you got a mk3 16v one Loon I may want one once I've done some maths on ratios.

[Golfwise]

Re: Transmission 02A repairer/rebuild in Melb ?

Does any body know of a good repairer/reco for an 02A trans in Melb ?

Send it to Tassie and I'll do it.

[aussieg60]

Some how a gear has jammed against this shaft as shown in the photo. I took a photo through the drive shaft flange hole. I have seperated the trans from the engine. When I put it in gear thats what had happened, it got jammed. Im not sure what to do, is it a complete overhaul ? How could the gear move ?

[Golf Loon]

I have 3 boxes. Codes are ata agc and csf. They are for 4 cylinders not VR6 and have hydraulic clutches. $1000 each.

[DVR68U]

thats a pretty wierd problem. wouldnt think the gear could just move out of postion like that. is this out of a vr6 ?

[aussieg60]

No, not a Vr6. Its from a G60 (ATA). The box has been sitting for some time, with no oil. I used to crank it round in neutral when it was attached to the engine.

[Golfwise]

02a gearbox

You would be looking at the diff going by your description .
Means a stripdown.