Scopma RIB camper bed available here in Australia

[Bryn23]

Well,

I'd been searching for the last 6 months of my options for a rock n roll bed, looked overseas, struggle to find uk companies to ship to Australia, then there as the issue of compliance here.

Got a heads up from another forum member "Craig902" about Wanderlust Campers up at Coolum, as they just started to sell their campers.

I asked if i was able to just buy their bed as i was building my own camper, and Philip was very accommodating.

They can fit and also have an engineer that will sign it off as a ADR approved Seating.

I've got one on order, i went up to look at the Scopma RIB (French Made Bed) it has to be the best bed I've seen so far.

3 point seat belts, integrated head rests, rear head rest, all covered in VW fabric to match the factory VW seats.

I also got the optional 220mm slider that will allow me to have the bed sitting closer to the rear of the vehicle.

As it is a custom build for each bed, I was also able to increase the height of the frame work to allow a porta potty under the bed.

https://www.facebook.com/wanderlustcampers/videos/1872125306400768/

I'd just though i'd post this as i know its not easy finding a good camper bed and this may save you time.

SCOPEMA

Cheers,

Bryn

[Bryn23]

I should also point out the Lift up camper roof system Philip designed, fantastic design, i believe he sells and installs these as well.

its just good to see another option for camper roofs in Aus.

[Bryn23]

I got some photo's of my new RIB camper bed.

Looks pretty damm good to me, can't wait to get it fitted

[Kathryn]

Well,

I'd been searching for the last 6 months of my options for a rock n roll bed, looked overseas, struggle to find uk companies to ship to Australia, then there as the issue of compliance here.

Got a heads up from another forum member "Craig902" about Wanderlust Campers up at Coolum, as they just started to sell their campers.

I asked if i was able to just buy their bed as i was building my own camper, and Philip was very accommodating.

They can fit and also have an engineer that will sign it off as a ADR approved Seating.

I've got one on order, i went up to look at the Scopma RIB (French Made Bed) it has to be the best bed I've seen so far.

3 point seat belts, integrated head rests, rear head rest, all covered in VW fabric to match the factory VW seats.

I also got the optional 220mm slider that will allow me to have the bed sitting closer to the rear of the vehicle.

As it is a custom build for each bed, I was also able to increase the height of the frame work to allow a porta potty under the bed.

The Wanderlust Campers bed seat in... - Wanderlust Campers

I'd just though i'd post this as i know its not easy finding a good camper bed and this may save you time.

SCOPEMA

Cheers,

Bryn

Hi Bryn,

Do you mind me asking how much this set you back? And did you have a VW?

[ozgti]

Well,

I'd been searching for the last 6 months of my options for a rock n roll bed, looked overseas, struggle to find uk companies to ship to Australia, then there as the issue of compliance here.

Got a heads up from another forum member "Craig902" about Wanderlust Campers up at Coolum, as they just started to sell their campers.

I asked if i was able to just buy their bed as i was building my own camper, and Philip was very accommodating.

They can fit and also have an engineer that will sign it off as a ADR approved Seating.

I've got one on order, i went up to look at the Scopma RIB (French Made Bed) it has to be the best bed I've seen so far.

3 point seat belts, integrated head rests, rear head rest, all covered in VW fabric to match the factory VW seats.

I also got the optional 220mm slider that will allow me to have the bed sitting closer to the rear of the vehicle.

As it is a custom build for each bed, I was also able to increase the height of the frame work to allow a porta potty under the bed.

The Wanderlust Campers bed seat in... - Wanderlust Campers

I'd just though i'd post this as i know its not easy finding a good camper bed and this may save you time.

SCOPEMA

Cheers,

Bryn

Will the engineer sign off the swivel bases for the front seats?

Sent from my SM-G930F using Tapatalk

[Bryn23]

I can't see why not, as its a simple job.

I had my swivel seat bases signed off by another engineer in Brisbane, before i got the bed.

[Ptothek]

I got some photo's of my new RIB camper bed.

Looks pretty damm good to me, can't wait to get it fitted

[ATTACH=CONFIG]28144[/ATTACH] [ATTACH=CONFIG]28146[/ATTACH]

Hi Bryn,

How much did the RIB camper bed set you back inc fitting? Many thanks Paul