help needed - harmonic balancer installation tool needed- or similar - melbourne

[atmot]

so pulled the belts aparts again, checked and all timing marks are spot on.
put it back together and still just free spinning but not starting.. its got me stumped now .
its on gas, so no fuel likes were disconnected.. also tried starting on petrol and nothing still..
pulled on plug out and it want fouled.. i might try and change the coil... although its only a few months old..
recharging the battery overnight ready to tackle it tomorrow morning..

[atmot]

all sorted, for anyone doing 2.5l petrol aet van, note the timing mark to line up the balancer is at about 8 oclock on the lower cover. also when the balancer is off, the key on the cog will line up at about 9 oclock in line with the top of the lower cover. timing mark on the camsharft is very hard to see and its not very visible, use the distributor and line up the rotor button to cylinder 1 mark. then you should be able to see a mark on the camshaft.
hope that will help the few owners of aet engines..