Tweet
Right side drive shaft has stripped out the splines at the diff end. Need to know where to get a new one or more importantly where not to. I will replace the diff output shaft also as the splines are warn on it as well.
Email Notifications Failing (mostly Telstra)
Hello everyone. Seems there is an issue with Telstra (possible others) blocking email from our server. If you are trying to sign up I would suggest a different email if possible. If you're trying to reset your password and it fails please use the Contact Us page:
See more
See less
-
Golf5 103Tdi 6m Sportline] T5 LWB 128Tdi 6m] OKA LT ] Haflinger '66 (the original air cooled boxer!)] -
They generally only strip the splines off the output shaft hub, as it's designed to be a sacrificial part. That's only held in with a long bolt in the centre.
Last time I looked into it, you couldn't get the output shaft in the transmission on it's own. You have to buy the whole gearbox.'07 Transporter 1.9 TDI
'01 Beetle 2.0 -
replace the stub shaft on the box and replace the driveshaft to fix. not sure where apart from vw.. not a big jobVOLKSWAGEN TECHNICIAN - 16 YEARS OF PAIN..VCDS CODING- FAULT DIAGNOSIS - PRE PURCHASE INSPECTIONS- REPAIRS9W2 BT KITS -$300 - 9W7 BT KITS - $450 - CANBUS UPGRADE $150BRISBANE / GOLD COASTComment
-
Stub shaft and c.v. shaft are both available seperatly from VW, very common issue, i think stub shaft is about $400 and driveshaft is exchange from VW at about $550 i think, be carefull with the seal, as V-worx said their is a bolt through the centre of the stub holding it on.Comment
Comment